Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Velcom Manuals
  4. Greenhouse Kit
  5. MAGNOLIA
  6. Technical manual

Velcom MAGNOLIA Technical Manual

Made of 1”x1” galvanized steel pipe covered with high density uv polycarbonate
Hide thumbs Also See for MAGNOLIA:

Advertisement

Quick Links

Download this manual
TECHNICAL MANUAL
MAGNOLIA
Made of 1"x1" Galvanized Steel Pipe
Covered with High Density UV Polycarbonate
Set of product
Width 10ft (3m) • Height 7.1ft (2.15m)
Length of base 13ft (4m) • Optional Extension by 6.5ft (2m) etc.
Thank you for cho os ing the M AG N OLIA greenhous e
W hich will s erve you for decades unde r pro per us age !

Advertisement

loading

Related Manuals for Velcom MAGNOLIA

Summary of Contents for Velcom MAGNOLIA

  • Page 1 TECHNICAL MANUAL MAGNOLIA Made of 1”x1” Galvanized Steel Pipe Covered with High Density UV Polycarbonate Set of product Width 10ft (3m) • Height 7.1ft (2.15m) Length of base 13ft (4m) • Optional Extension by 6.5ft (2m) etc. Thank you for cho os ing the M AG N OLIA greenhous e...
  • Page 2 TECHNICAL CERTIFICATE of GREENHOUSE “MAGNOLIA” DISCRIPTION The greenhouse “MAGNOLIA” is designed to create the climate, which is productive to grow horticultural crops on the garden plots. The length of the greenhouse is 13’ (4m) width is 10’ (3m) and height is 7.1’ (2.15m) with ability to extend length by 6.5’...

  • Page 3: List Of Accessories

    1. LIST OF ACCESSORIES Image INSERT BASE № Part name +6.5’L (could be different 13’L (optional) from the actual configuration) End-Face half-arch, right -hand "A" End-Face half-arch, left-hand, "A" (with X-crimping) End-Face half-arch, right -hand "B" End-face half-arch, left-hand, "B" (with X-crimping) End-face post, side, 1670 мм...
  • Page 4 Image INSERT BASE № Part name +6.5’L (could be different 13’L (optional) from the actual configuration) Connecting stringer starter, 2012 mm Connecting stringer With X-crimping, 2068 mm Side diagonal support, 600 мм Outside corner roof molding, 120° / 2025 мм Outside corner molding, 90°...
  • Page 5 2. ASSEMBLY DIAGRAM “MAGNOLIA” PRODUCT Fig.1 End-Face "A" and “B" Fig.2 Intermediate arch "E" Fig.3 Assembling frame (side view) Fig.4 Air gate Doors "C", "D" 3. Assembling End-Face "A" and "B" Fig.1 Attention! Places of fastening parts are indented and circled with a marker. Polycarbonate mounting places are indented.
  • Page 6 3.1. Connect the left 1x and right 1 half-arch of the end-face "A". Secure the connection from two sides by four self-tapping screws 45 (16 mm). Similarly, connecting left 2x and right 2, and assembling the end-face "B". 3.2. Secure the post 3 to the Arch ends by self-tapping screws 45. 3.2.
  • Page 7 3.5. Install the Top lintel 10 between the posts 7-8 at a distance of 1950mm from the lower lintel, fasten with the screws 45: 3.6. Set four Middle lintels 11 between the doorway posts 7-8 and side post 3, secure with the screws 45: 3.7.
  • Page 8 Assembling Air gate Doors "C", "D" Fig.4 3.10. Using the details 15-16-17-18-19, assemble with self-tapping screws 45 the top door "C" and the lower door "D" . Right post 16 on door "C","D", 960mm (with hinge holes) must be right, and 17(18) with hole for handle must be left. Hole for the handle in the top door "C"...
  • Page 9 4. Assembling intermediate arches Fig.2 Assemble the intermediate arches "E" using the half-arc 21x-21, Side posts for intermediate arch 22, install top diagonal support 23 with the self-tapping screws 45. To comply with the correct geometry of the arches, use the assembled end as a template, setting it the details for the assembly of the arch.
  • Page 10 5.7. Install the Outside corner roof molding 29 (120° / 2025mm) in the joints of the pillars and the roof arch, fix them from above with self-tapping screws 45. 5.8. Connect the Anchor grouser 25 (150mm) with Anchor post 24 (250mm) using self-tapping screws 45 so that you get T-shaped Anchor-legs.
  • Page 11 5. INSTALLATION OF CELLULAR POLYCARBONATE (CP) TO THE ENDS The required number of sheets and cutting patterns for cellular polycarbonate are given at the end of the instructions Annex 1. The greenhouse frame is designed to be covered with Cellular polycarbonate 4mm thick Attention! When installing the Polycarbonate, it is important that the lines of the joint venture cells are located vertically (from top to bottom).
  • Page 12 The scheme of fixing cellular polycarbonate to the end-face and doors 5.7. Fasten hook 49 with self-tapping screws 45 to the right upper crosspiece of the end, the counter loop of the hook on the diagonal of the upper door so that the hook fixes the door in the open position (see the picture above).
  • Page 13 6. MOUNTING OF CELLULAR POLYCARBONATE ON SIDE WALLS Parts “E” with dimensions 2100x1670mm are used for side walls mounting. Annex 1. 6.1. Start mounting the Polycarbonate sheets “E” on the sides from the ends. Attach a sheet of polycarbonate to the wall of the frame, aligning the top of the sheet in the center of corner No.
  • Page 14 7. MOUNTING OF CELLULAR POLYCARBONATE ON THE ROOF Attention! When installing the polycarbonate, it is important that the lines of the Polycarbonate cells are located on the roof along the arcs, and on the side walls - vertically. Parts “D” with dimensions 2100x3250mm are used for Roof mounting. Annex 1. 7.1.
  • Page 15 8. MOUNTING OF EXTERNAL CORNERS 8.1. Mount four corners 30 (90°, 1670 mm) using self-tapping screws 46 (19mm) on the vertical corners of the frame, 6 screws per corner, closing the corner joints of polycarbonate sheets: 8.2. Mount the remaining corners 29 (120 °, 2025 mm) over the junction of the roof and wall polycarbonate sheets using self-tapping screws 46 (19mm): - 14 -...
  • Page 16 OPTIONAL EXTENTION OF MAGNOLIA 19.5’ GREENHOUSE DIAGRAM Possible Extension up to 32’ Quantity of Polycarbonate sheets for different size of Greenhouse MAGNOLIA 13’L x 10’W x 7’H (1 Base) – 3.5 sheets Total 19.5’L x 10’W x 7’H (1 Base, 1 Insert) – 5 sheets Total 26’L x 10’W x 7’H (1 Base, 2 Insert) –...
  • Page 17 ATTENTION! The greenhouse has a sailing. Do not leave the greenhouse on unfortified ground. When installing a greenhouse in a windy area, additional fastening to the ground with improvised materials (rod, reinforcement, etc.) is required. Do not install the greenhouse in close proximity (less than 2 meters) to buildings, fences or walls.
  • Page 18 10. LIMITED WARRANTY OBLIGATIONS 1. The manufacturer guarantees that the greenhouse frame (hereinafter referred to as the product) is new, fully equipped, and free from manufacturing defects. 2. The manufacturer is responsible for completing the product. 3. The manufacturer is responsible for the collection of the product in accordance with the instructions.
  • Page 19 (dense tape or similar material). Magnolia greenhouse with length of 13’L (4m) (1 base) Cellular polycarbonate sheet 2100х6000 mm – 3 pcs. Cellular polycarbonate sheet 2100х4000 mm – 1 pc.
  • Page 20 Magnolia greenhouse with length 19.5’L (6m) (1 base + 1 extension) Cellular polycarbonate sheet 2100х6000 mm – 5 pcs. - 19 -...
  • Page 21 Magnolia greenhouse with length of 26’L (8m) (1 base + 2 extensions) Cellular polycarbonate sheet 2100х6000 mm – 6 pcs. Cellular polycarbonate sheet 2100х2000 mm – 1 pc. - 20 -...
  • Page 22 Magnolia greenhouse with length of 32.5’L (10m) (1 base + 3 exten.) Cellular polycarbonate sheet 2100х6000 mm – 7 pcs. Cellular polycarbonate sheet 2100х2000 mm – 1 pc. - 21 -...
  • Page 23 Thank you for choosing the MAGNOLIA greenhouse Which will serve you for decades under proper usage ! Due to the continuous improvement of the products the manufacturer reserves the right to make changes in the design without prior notice to the consumer.