Table of Contents
Advertisement
Quick Links
Operating Instructions
Bedienungsanleitung
Cordless Multi Purpose Cutter
Akku-Mehrzwecksäge
Model No: EY4542
Before operating this unit, please read these instructions completely and save this manual for future use.
Vor Inbetriebnahme des Gerätes die Betriebsanleitung bitte gründlich durchlesen und diese Broschüre zum
späteren Nachschlagen sorgfältig aufbewahren.
- 1 -
Advertisement
Table of Contents
Related Manuals for Panasonic EY4542LN2M
Summary of Contents for Panasonic EY4542LN2M
-
Page 1: Operating Instructions
Operating Instructions Bedienungsanleitung Cordless Multi Purpose Cutter Akku-Mehrzwecksäge Model No: EY4542 Before operating this unit, please read these instructions completely and save this manual for future use. Vor Inbetriebnahme des Gerätes die Betriebsanleitung bitte gründlich durchlesen und diese Broschüre zum späteren Nachschlagen sorgfältig aufbewahren. - Page 2 Index/Index English: Page Deutsch: Seite FUNCTIONAL DESCRIPTION FUNKTIONSBESCHREIBUNG Fig. 1 - 2 -...
- Page 3 Power switch Betriebsschalter Front cover Frontabdeckung Blade (EY9PM13C) Blatt (EY9PM13C) Dust case Staubgehäuse Battery pack alignment mark Akku-Ausrichtmarke Depth adjustment nut Tiefeneinstellmutter LED light on/off button LED-Leuchten-EIN/AUS-Taste Hex wrench Inbusschlüssel Pack cover Akkuabdeckung Switch lock lever Front grip Schalter-Verriegelungshebel Vorderer Griff Transparent guard Shoe Klarsichthaube...
-
Page 4: How To Use This Manual
. INTRODUCTION This tool is a Multi Purpose Cutter. By changing the blade, it can be used to cut wood, metal, and plastic. Dust can be collected by an integrated dust case or via a connected vacuum (by at- taching the hose to the cutter). DANGER This product is a cutting tool, designed to cut through metal and wood. -
Page 5: Further Safety Instruc- Tions For All Saws
Further safety instruc- tions for all saws Causes and operator prevention of kickback: - kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the work- piece toward the operator; - when the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back to-... -
Page 6: Attaching Or Removing Battery Pack
··· min Revolutions or reciprocations Amperes WARNING • Do not use other than the Panasonic battery packs that are designed for use with this re- chargeable tool. • Do not dispose of the battery pack in a fire, or expose it to excessive heat. -
Page 7: Operation
2. To remove the battery pack (See Fig. 3) Push on the button from the front to release the battery pack. Fig. 3 OPERATION Before Using the Tool This tool is intended for cutting unhardened fer- rous metal, nonferrous metal, wood, and plastic. Refer to the “Accessories”... -
Page 8: Installing Blade
Installing Blade Follow these steps: 1. Remove the battery pack from the tool. 2. Remove any cutting debris from blade area. 3. Use the retracting handle to retract (open) the lower guard. 4. Install the blade as illustrated. (See Fig. 6) Make sure that both the direction arrow on the blade and the direction arrow on the upper blade cover point in the same direction. -
Page 9: Using The Tool
Using the Tool CAUTION: To reduce the risk of injury read the Safety In- structions at the front of this manual before using the tool. WARNING To reduce the risk of injury, wear safety gog- gles or glasses with side shields while using the cutter. - Page 10 ment nut securely. * When wood material is 10 mm (3/8") or less thick, adjust the cutting depth so that the blade protrudes approx. 5 mm (3/16") from the bot- tom of the material. Fig. 9 Rip fence (EY3500B7727) (Available as an accessory, not included) Rip fence is convenient for rip cuts and repeated cuts of uniform width.
-
Page 11: Control Panel
Fig. 12 NOTE When the cutter has difficulty ejecting or collect- ing dust. The cutter outlet may be clogged with dust. Open the front cover and remove any dust. Control Panel (1) LED light Fig. 13 Pressing (LED light ON/OFF button) toggles the LED light on and off. - Page 12 ion batteries shortens their service life dra- matically. The tool includes a battery protec- tion feature designed to prevent excessive discharging of the battery pack. • The battery protection feature activates immediately before the battery loses its charge, causing the battery low warning lamp to flash.
- Page 13 WARNING To prevent the risk of serious personal injury: • When making an incomplete cut or cutting is interrupted, or blade is binding or cutter is stalling; re- lease the power switch immediately and hold the cutter motionless in the material until the blade comes to a complete stop.
- Page 14 [Battery Pack] For Appropriate Use of Battery pack Li-ion Battery pack (EY9L40) • For optimum battery life, store the Li-ion bat- tery pack following use without charging it. • When charging the battery pack, confirm that the terminals on the battery charger are free of foreign substances such as dust and water etc.
- Page 15 3. During charging, the charging lamp will be lit. When charging is completed, an internal elec- tronic switch will automatically be triggered to prevent overcharging. • Charging will not start if the battery pack is warm (for example, immediately after heavy-duty operation).
-
Page 16: Lamp Indications
LAMP INDICATIONS Green Lit Charger is plugged into the AC outlet. Ready to charge. Green Flashing Quickly Charging is completed. (Full charge.) Green Flashing Battery is approximately 80% charged. (Usable charge. Li-ion only.) Green Lit Now charging. Orange Lit Battery pack is cool. The battery pack is being charged slowly to reduce the load on the battery. -
Page 17: Maintenance
To assure product SAFETY and RELIABILITY, servicing should be performed by an authorized service center. Always insist on genuine Panasonic replacement parts. Cleaning Tool Keep your tool clean for good cutting perform- ance, and to help keep it safe to use. -
Page 18: Specifications
. SPECIFICATIONS Motor voltage Blade speed Blade size Outside diameter Arbor size Maximum cutting depth Overall length Weight (with battery pack) BATTERY PACK Model Storage battery Battery voltage Capacity BATTERY CHARGER Model Electrical rating See the rating plate on the bottom of the charger. Weight [Li-ion battery pack] 14.4 V... - Page 19 7.2 V EY9065 EY9080 EY9066 EY9086 1.2 Ah EY9180 EY9182 1.7 Ah Charging time EY9168 EY9188 2 Ah 3 Ah 3.5 Ah This chart may include models that are not available in your area. NOTE: Please refer to the latest general catalogue. 9.6 V 12 V 15.6 V...
- Page 20 If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. IF THE FITTED MOULDED PLUG IS UN- SUITABLE FOR THE SOCKET OUTLET IN...
- Page 21 Panasonic Electric Works Co., Ltd. 1048, Kadoma, Osaka 571-8686, Japan EN. GR. FR. IT. ND. ES. DN. SW. NR. FN. RUS. Uk EY971045421 H2007 Printed in China - 21 -...
- Page 22 - 22 -...