Sony PCG-Z1M User Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Laptop
  5. PCG-Z1M
  6. User manual
Sony PCG-Z1M User Manual

Sony PCG-Z1M User Manual

Vaio pcg-z series
Hide thumbs Also See for PCG-Z1M:
Table of Contents

Advertisement

Quick Links

Download this manual
N
Sony Notebook User Guide
P C G - Z s e r i e s

Advertisement

Table of Contents
loading

Related Manuals for Sony PCG-Z1M

Summary of Contents for Sony PCG-Z1M

  • Page 1 Sony Notebook User Guide P C G - Z s e r i e s...

  • Page 2: Read This First

    Macrovision Corporation. Reverse engineering or disassembly is prohibited. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user licence agreement.
  • Page 3 Sony, DVgate, Hotkey Utility, BlueSpace NE, ISP Selector, MovieShaker, PictureGear Studio, Network Smart Capture, SonicStage, Sony Notebook Setup, Sony Style Imaging, UI Design Selector, VAIO Edit Components, Memory Stick, the Memory Stick logo, VAIO and the VAIO logo are trademarks of Sony Corporation.
  • Page 4 Read this first ® NERGY ® ® As an E Partner, Sony has determined that this product meets the E guidelines for energy efficiency. NERGY NERGY ® The International E Office Equipment Program is an international program that promotes energy saving through the use NERGY of computers and their office equipment.

  • Page 5: Safety Information

    Read this first Safety information Owner's record The serial number and model number are located on the bottom of your Sony notebook. Record the serial number and the model number and refer to them if you call VAIO-Link.
  • Page 6 Do not use the modem or a telephone to report a gas leak in the vicinity of the leak. To change the backup battery, please contact your nearest Sony Service Centre. Before you connect peripherals, turn off the computer and all peripherals.
  • Page 7 Read this first Connectivity Never install modem or telephone wiring during a severe lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Be cautious when installing or modifying telephone lines. Use your notebook only with the supplied AC adapter. To disconnect your notebook completely from mains voltage, unplug the AC adapter.

  • Page 8: Regulatory Information

    Read this first Regulatory information Sony hereby declares that this product is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (radio equipment and telecommunications terminal equipment Directive). Declaration of Conformity The European Union is targeting the free movement of goods for the internal market and to prevent technical barriers to trade. This effort has resulted in several EU Directives asking that manufacturers make their products comply with essential standards.
  • Page 9 Read this first Depending on the country, usage of the built-in Bluetooth™ functionality may be restricted. For country-specific details, please refer to the Bluetooth™ Safety Regulations leaflet. Depending on the country, usage of the Wireless LAN functionality may be restricted. For country-specific details, please refer to the Wireless LAN Regulations leaflet.
  • Page 10 Read this first Disposing of lithium ion batteries Do not handle damaged or leaking lithium ion batteries. Dispose of promptly and properly at end-of-life. Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
  • Page 11 Portability - The rechargeable battery pack provides hours of use without AC power. Sony audio and video quality - A high-resolution LCD screen enables you to take advantage of today’s advanced multimedia applications, games, and entertainment software. Multimedia features – Enjoy audio and video CDs.

  • Page 12: Documentation Pack

    VAIO-Link information; An Application CD guide, which explains the purpose and use of the final system recovery CD. Use this when (re)installing bundled software. Your Sony Guarantee conditions; A Safety Regulations leaflet; A Wireless Lan Regulations leaflet;...
  • Page 13 Welcome Using Your Sony Notebook shows you how to use the standard components of your system. In this part of the manual you will also find out what you can do with a Memory Stick™ and how to use the Wireless LAN and Bluetooth™ functions.
  • Page 14 Consult the Online Help files of the software you are using for detailed information on features and troubleshooting. Refer to the Microsoft Quick Start manual for more information on Windows Go to http://www.club-vaio.sony-europe.com software. ® to find online tutorials about your favourite VAIO...
  • Page 15 Welcome Your notebook and its accessories The following items are in the box: Main unit Product recovery CD-ROMs Documentation pack AC adapter If you find an extra phone plug in the box, see Using the correct phone plug Rechargeable battery pack Phone cable Power cord Phone plug (country-specific)

  • Page 16: Ergonomic Considerations

    Welcome Ergonomic considerations You will be using your notebook as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations to both stationary and portable environments: Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, touchpad, or external mouse.
  • Page 17 Welcome Viewing angle of the computer’s display – Use the display’s tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness setting of the display as well. Lighting –...

  • Page 18: Table Of Contents

    Using your notebook Using your notebook This section describes how to start using your computer and how to use your computer’s internal and external devices. Locating controls and connectors Connecting a power source Starting your notebook Shutting down your notebook Using the keyboard Using the touchpad Using the CD-RW/DVD-ROM drive...

  • Page 19: Locating Controls And Connectors

    Using your notebook Locating controls and connectors Right MagicGate Memory Stick™ slot Wireless LAN switch P1/ P2 buttons CD-RW/DVD-ROM drive Do not cover the ventilation slot when the computer is on. (page 42) CD-RW/DVD-ROM drive tray eject button (page 58) Ventilation slot (page 34) Modem connector...
  • Page 20 Using your notebook Left MagicGate Memory Stick™ light indicator MagicGate Memory Stick™ slot USB 2.0 (High-speed/Full-speed/Low- speed) Type A connectors i.LINK™ (IEEE1394) S400 port Do not cover the ventilation slot when the computer is on. (page 42) Microphone connector (page 42) Connector for headphones or external speakers (page 74)
  • Page 21 Using your notebook Front Hard disk drive indicator Num Lock indicator Caps Lock indicator Scroll Lock indicator Power button Battery indicator Wireless LAN indicator Bluetooth™ indicator (page 34) Keyboard (page 34) Touchpad (page 34) Left/right buttons (page 28) Speakers (page 23) LCD screen (page 58) (page 58)
  • Page 22 Using your notebook Back DC In Battery connector Monitor/VGA connector Ethernet connector (page 23) (page 23) (page 69) (page 83)
  • Page 23 Using your notebook Bottom Battery lock/unlock Battery release lever Port replicator connector Ventilation slot Reset button (page 23) (page 23) (page 65) (page 28)

  • Page 24: Connecting A Power Source

    Using your notebook Connecting a power source You can use either an AC adapter or a rechargeable battery pack as a power source. Using the AC adapter To use the AC adapter, proceed as follows: Plug the cable attached to the AC adapter (1) into the DC In connector (2) on the computer. Plug one end of the power cord (3) into the AC adapter.

  • Page 25: Using The Battery Pack

    Using your notebook Using the battery pack You can use a battery pack as a source of power. The battery pack supplied with your computer is not fully charged at the time of purchase. Inserting the battery pack To insert the battery, proceed as follows: Move the lock lever (1) on the bottom of the computer to the Unlock position.
  • Page 26 Using your notebook Charging the battery pack To charge the battery pack, proceed as follows: Connect the AC adapter to the computer. Insert the battery pack. The computer automatically charges the battery (the battery indicator light flashes in a double blink pattern as the battery charges).
  • Page 27 Using your notebook The battery indicator light is on while you use the battery pack as a power source. When the battery life is nearly depleted, both the battery and power indicators start flashing. For some software applications and some peripheral devices, your computer may not enter Hibernate mode even when battery life is low. To avoid loss of data when using battery power, you should save your data frequently and manually activate a power management mode, such as Standby or Hibernate.
  • Page 28 Using your notebook Removing the battery pack To remove the battery pack, proceed as follows: Turn off the computer and close the cover. Slide the lock lever (1) to the Unlock position. Slide and hold the release lever (2) as indicated and slide the battery away from the computer. You can remove the battery pack without turning off the computer if it is connected to the mains voltage (AC adapter).

  • Page 29: Starting Your Notebook

    Using your notebook Starting your notebook To start your computer, proceed as follows: Lift the cover in the direction of the arrow. Press the power button of the computer until the green power indicator light turns If necessary, press <Fn>+<F5> to adjust the brightness controls for the LCD display.

  • Page 30: Shutting Down Your Notebook

    Using your notebook Shutting down your notebook It is important that you shut down your computer properly so you do not lose unsaved data. To shut down your computer, proceed as follows: Click the Start button. Click Turn Off Computer. The Turn off computer screen appears.

  • Page 31: Using The Keyboard

    Using your notebook Using the keyboard Your keyboard is very similar to a desktop computer’s, but has additional keys that perform specific notebook-related tasks.
  • Page 32 Using your notebook Keys Escape key (1) Function keys (2) Print Screen key (3) Correction keys (4) <Fn> key (5) Navigation keys (6) Application key (7) Numeric keypad area (8) Operator keys (9) ® Windows key (10) Descriptions The <Esc> (Escape) key is used to cancel commands. The twelve function keys along the top of the keyboard are used to perform designated tasks.
  • Page 33 Using your notebook Combinations and functions with the Windows Combinations + <F1> + <Tab> + <E> + <F> + <Ctrl> + <F> + <M> <Shift> + + <M> + <R> <Fn> + + <Insert> Functions Displays Help and Support Center. Switches the selected button on the taskbar.
  • Page 34 Using your notebook Combinations and functions with the <Fn> key Combinations/ Feature <Fn> + (ESC): Standby <Fn> + (F3): speaker switch <Fn> + (F4): speaker volume <Fn> + (F5): brightness control <Fn> + (F7)*: switch to the external display <Fn> + (F12): Hibernate <Fn>...
  • Page 35 Turns on when the Memory Stick™ is in use. Turns off when the Memory Stick™ is no longer in use. Set up functions for each button. For more details see the Sony Notebook Setup chapter in the Software Guide. Data is read from or written to the hard drive.

  • Page 36: Using The Touchpad

    Using your notebook Using the touchpad The keyboard contains a cursor-pointing device, your touchpad (1). You can point to, select, drag, and scroll objects on the screen using the built-in touchpad. Action Description Point Slide one finger on the touchpad to place the pointer on an item or object.

  • Page 37: Using The Cd-Rw/Dvd-Rom Drive

    Using your notebook Using the CD-RW/DVD-ROM drive Your computer is equipped with a CD-RW/DVD-ROM drive. To insert a disc, proceed as follows: Turn on the computer. Press the eject button (1) to open the drive. The tray slides out. Place a disc in the middle of the tray with the label side facing up until the disc clicks into place. Close the tray by pushing it gently.
  • Page 38 Using your notebook Using the CD-RW function* Your notebook is equipped with a CD-RW/DVD-ROM drive. To burn CDs, you can use CD-RW and CD-R discs: The CD-RW (CD-ReWritable) disc is a data memory medium that can be used to write, erase and rewrite a program or other data.
  • Page 39 Using your notebook Using the DVD function To achieve optimum performance when playing DVD-ROMs, you should follow these recommendations. You can play DVDs using the DVD-ROM drive and the WinDVD for VAIO software. See the help file on the WinDVD for VAIO software for details. Close all open applications before playing a DVD-ROM movie.

  • Page 40: Using Pc Cards

    Gently push the card into the slot until the card is fixed into the connector. Some PC Cards may require you to disable idle devices when using the PC Card. You can use Sony Notebook Setup to disable devices. Be sure to use the most recent software driver provided by the PC Card manufacturer.
  • Page 41 Using your notebook Removing a PC Card Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not work properly. If you want to remove a PC Card when your computer is off, skip steps 1 to 7. To remove a PC Card, proceed as follows: Double-click the Safely Remove Hardware icon in the system tray.
  • Page 42 Do not select and stop a USB disc drive, a Sony i.LINK™ CD-RW/DVD-ROM drive or a Sony i.LINK™ DVD-ROM drive. If you stopped a Sony i.LINK™ CD-RW/DVD-ROM drive or a Sony i.LINK™ DVD-ROM drive by mistake, disconnect the port replicator and connect it...

  • Page 43: Using Memory Stick

    Mobile phones. There are currently two different types of Memory Stick™: The generic Memory Stick™, coloured blue. The MagicGate Memory Stick™, coloured white. You can purchase Memory Sticks™ from the Sony Style website (http://www.sonystyle-europe.com), or from your local Sony dealer.
  • Page 44 Using your notebook Why Memory Stick™? Sony's vision is to expand the world of communication, promoting the portability of digital data. The Memory Stick™ is the resulting medium, through which digital devices can be instantly connected. With it, you can download data from any compatible device, then transfer it to another in a single and instant transfer.
  • Page 45 Using your notebook Generic Memory Stick™ The original Memory Stick™, blue in colour, can be used to record image data taken with digital still cameras, etc. or data from the PC. With it, you can record, play back and transfer various kinds of data at any given time.
  • Page 46 Using your notebook MagicGate Memory Stick™ The MagicGate Memory Stick™, white in colour, records PC and image data just like its blue counterpart; the difference is it uses the MagicGate copyright protection technology. With this type of Memory Stick™, also called the MG Memory Stick™, you can enjoy the following features: 32, 64 and 128 MB capacity versions.
  • Page 47 In the music world, however, illegal acts of distributing music without the permission of the artist, particularly on the Internet, have recently been on the increase. That is why the Recording Industry logo indicates the copyright protection system devised by Sony. It is not meant to guarantee compatibility with other media.
  • Page 48 (SDMI) to study technology for protecting copyrights during the electronic distribution of music. Sony offers the MagicGate Memory Stick™ and Memory Stick™ Walkman with a copyright protection function that complies with SDMI standards, thereby providing an environment where individuals can record and enjoy third-party music data without worrying about copyright infringement.
  • Page 49 Using your notebook Sony mobile phones Digital printers AIBO the Sony Entertainment Robot To find out more about the products available in your country, go to: http://www.sonystyle-europe.com Write-protecting a Memory Stick™ Memory Sticks™ are designed with an erasure prevention switch to protect valuable data from accidental erasure or overwriting.

  • Page 50: Inserting A Memory Stick

    Using your notebook Inserting a Memory Stick™ There are 2 ways you can insert a Memory Stick™ in your notebook: Using the Memory Stick™ slot; Using one of the PC Card slots. To do this, you need an optional PC Card adapter. You can only insert one Memory Stick™...

  • Page 51: Removing A Memory Stick

    Using your notebook Removing a Memory Stick™ To remove a Memory Stick™ using the Memory Stick™ slot, proceed as follows: Check that the access light is off. Push the Memory Stick™ in towards the notebook. The Memory Stick™ ejects. Pull the Memory Stick™ out of the slot. Always remove the Memory Stick™...

  • Page 52: Using The Modem

    Using your notebook Using the modem Your notebook is equipped with an internal modem. You need to connect to a phone line to take advantage of online services and the Internet, as well as to register your computer and software online, and to contact VAIO-Link. To connect a phone line, proceed as follows: Plug one end of the phone cable (1) into the phone line jack on the computer.

  • Page 53: Using The Correct Phone Plug

    Using your notebook Using the correct phone plug If there are two phone plugs in the box, make sure you use the correct one for the country you are in, as follows: UK: The connector can be identified by its cuboid shape and flat pins.

  • Page 54: Using Power Saving Modes

    Using your notebook Using power saving modes When you use a battery as the source of power for your computer, you can take advantage of power management settings to conserve battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate.

  • Page 55: Using Hibernate Mode

    Using your notebook To return to Normal mode, proceed as follows: Press any key. If you press the power button for more than four seconds, the computer will switch off automatically. When the computer is in Standby mode, you cannot insert a disc. Standby requires less time than Hibernate.
  • Page 56 Using your notebook If you press the power button for more than four seconds, the computer will switch off automatically. When the computer is in Hibernate mode, you cannot insert a disc. Hibernate mode requires more time than Standby mode to be activated. It takes more time to return to normal mode from Hibernate mode than from Standby mode.

  • Page 57: Using The Bluetooth™ Functionality

    Using your notebook Using the Bluetooth™ functionality The Bluetooth™ wireless technology enables you to establish wireless communication between your notebook and other Bluetooth™ devices such as a notebook, a mobile phone or a modem station without any cable within a 10 metres range in open space. All Bluetooth™...
  • Page 58 Using your notebook The 2.4 GHz band with which Bluetooth™ devices or wireless LAN devices work, is used by various devices. Bluetooth™ devices use the technology to minimize the interference from other devices that use the same wave length. Communication speed and distances can be inferior to the standard values.

  • Page 59: Using Wireless Lan (Wlan)

    The Sony WLAN supports all normal Ethernet activities, but with the added benefits of mobility and roaming. You can still access information, internet/intranet and network resources, even in the middle of a meeting, or as you move from one place to another.
  • Page 60 Using your notebook Communicating without Access Point (ad-hoc) An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other central controller or Access Point. Each device communicates directly with other devices in the network.
  • Page 61 Using your notebook Enter a Network name (SSID)*. Select the Data encryption (WEP enabled) option button. Select the Network Authentication (Shared mode) option button. Deselect the The key is provided for me automatically option button. Some information becomes visible. Fill in the Network key*. The network key should be 5 or 13 ascii characters or 10 or 26 hexadecimal characters long.
  • Page 62 Select the network you want to use. Type the Network Key. If you are using the Sony Access Point PCWA-A200, by default, the network key has the same name as the network ID, but without the first digit. in the taskbar displaying the Wireless Network Connection message.
  • Page 63 Using your notebook For example: - ID of the network: 09316a (6 digits) - Network key: 9316a (5 digits) Type the Network Key again for confirmation. Click Connect. After 30 seconds, the connection is established. For more information about setting up an access point, see the documentation supplied with your Access Point.
  • Page 64 When you change the channel number on one computer, you need to change the channel number manually on all other devices intended for wireless connection. If you use a non-Sony Access Point, read the manual of the Access Point to be sure which channel to use. For more information on Wireless LAN, read the Wireless LAN Regulations leaflet.

  • Page 65: Connecting Peripheral Devices

    Connecting peripheral devices Connecting peripheral devices You can add functionality to your computer by connecting or using any of these peripherals. Before you connect peripherals, turn off the computer and all peripherals. Connect the power cord only after connecting all cables. Turn on the computer only after turning on all peripherals.

  • Page 66: Connecting A Port Replicator

    Connecting peripheral devices Connecting a port replicator Your notebook supports the use of an optional port replicator. Attaching a port replicator enables you to connect additional peripherals to your computer, such as a printer or an external display. DC In port 3 USB ports Printer port The port replicator can be powered only with the AC adapter supplied with your notebook.
  • Page 67 Connecting peripheral devices Attaching your computer to the port replicator To attach your computer to the port replicator, proceed as follows: Disconnect all peripherals from the computer. Plug the cable attached to the AC adapter (1) into the DC In port on the port replicator. Plug the power cord (2) into the AC adapter and an AC outlet.
  • Page 68 When attaching your computer to the port replicator, do not attempt to insert or remove the battery pack. Lifting and turning the computer with the attached port replicator may cause a temporary loss of power. Use the AC adapter that comes with your notebook or the optional Sony adapter.

  • Page 69: Disconnecting Your Computer From The Port Replicator

    Connecting peripheral devices Disconnecting your computer from the port replicator To disconnect your computer from the port replicator, proceed as follows: Stop the connected peripherals. Close the cover and pull the levers (1) on each side of the port replicator to disconnect the computer from the port replicator.

  • Page 70: Connecting An External Display

    Connecting peripheral devices Connecting an external display You can connect an external display to your notebook. For example, you can use your notebook with the following devices: Computer display (monitor); Projector. Turn off your computer and the peripherals, unplug the AC adapter and the power cord before connecting the external display. Connect the power cord after connecting all other cables.
  • Page 71 Connecting peripheral devices Connecting a computer display You can connect a computer display (monitor) either directly to your notebook or via the (optional) port replicator. To connect a computer display, proceed as follows: Plug the display cable (1) (not supplied) into the monitor/VGA connector If you want to connect a DVI monitor, plug the display cable (2) (not supplied) into the DVI-D connector on the port replicator.

  • Page 72: Connecting A Projector

    Connecting peripheral devices Connecting a projector You can connect a projector (such as the Sony LCD projector) directly to your notebook or via the port replicator. To connect a projector, proceed as follows: Plug the RGB signal cable (1) into the monitor/VGA connector identified by the Plug the audio cable (2) (not supplied) into the earphone connector identified by the Plug the RGB signal cable and the audio cable into the connectors of the projector.

  • Page 73: Connecting External Speakers

    Connecting peripheral devices Connecting external speakers You can enhance the sound quality of your computer by connecting external speakers. To connect external speakers, proceed as follows: Plug the speaker cable into the headphone connector. Plug the other end of the speaker cable into the external speaker. Turn down the volume of the speakers before you turn them on.

  • Page 74: Connecting An External Microphone

    Connecting peripheral devices Connecting an external microphone Your VAIO notebook does not contain an internal microphone. If you need to use a sound input device, for example to chat on the Internet, you need to plug in an external microphone. To connect an external microphone, proceed as follows: Plug the microphone cable into the microphone connector identified by the symbol.

  • Page 75: Connecting A Universal Serial Bus (Usb) Device

    Connecting peripheral devices Connecting a Universal Serial Bus (USB) device You can connect a USB device (for example, a mouse, floppy disk drive, keyboard, printer) to your computer. Before connecting or disconnecting a USB peripheral, you do not need to shut down the computer. You may need to install software (device drivers) supplied with your USB device before using the USB device.

  • Page 76: Connecting A Usb Mouse

    Connecting peripheral devices Connecting a USB mouse To connect a USB mouse, proceed as follows: Choose the USB connector you prefer to use (on your notebook or the optional port replicator). Plug the USB mouse cable into the USB connector. You can use your USB mouse.
  • Page 77 Connecting peripheral devices Connecting a USB floppy disk drive As an optional extra, you can purchase a USB floppy disk drive and connect it to your computer. To connect a USB floppy disk drive, proceed as follows: Choose the USB connector you prefer to use. Plug the USB floppy disk drive cable into the USB connector.
  • Page 78 Connecting peripheral devices Inserting a floppy disk To insert a floppy disk, proceed as follows: Hold the disk (1) with the label side facing up. Gently push the disk into the drive (2) until it clicks into place. Removing a floppy disk To remove a floppy disk, proceed as follows: When you have finished using the floppy disk, wait until the LED indicator (1) turns off and then press the eject button (2) to remove the disk.

  • Page 79: Connecting A Printer

    Plug the printer power cord (2) into an AC outlet. Before using the printer, you may need to change the Printer settings in the Sony Notebook Setup software. Turn off your computer and the printer, unplug the AC adapter and the power cord before connecting the printer.
  • Page 80 Plug the printer cable (1) supplied with the printer into the printer connector identified by the on the port replicator. Plug the printer power cord (2) into an AC outlet. Before using the printer, you may need to change the Printer settings in the Sony Notebook Setup software. symbol...

  • Page 81: Connecting An I.link™ Device

    Connecting peripheral devices Connecting an i.LINK™ device Your computer includes an i.LINK™ (IEEE1394) connector, which you can use to connect to an i.LINK™ device such as a digital video camera recorder or to connect two VAIO notebooks in order to copy, delete or edit files.

  • Page 82: Connecting A Digital Video Camera Recorder

    On Sony digital video cameras, connectors labelled DV Out, DV In/Out or i.LINK™ are i.LINK™-compatible. The Sony digital video camera recorder is an example; your digital video camera recorder may need to be connected differently. If your digital video camera recorder includes a Memory Stick™ slot, you can copy images from it to your computer via a Memory Stick™. To do so, simply copy images on the Memory Stick™, then insert it into the Memory Stick™...
  • Page 83 Connecting peripheral devices Connecting two VAIO notebooks You can copy, edit or delete files on another VAIO computer to your computer with an optional i.LINK™ cable. You can also print a document on a printer connected to another VAIO computer.

  • Page 84: Connecting To A Network (Lan)

    Connecting peripheral devices Connecting to a network (LAN) You can connect your computer to 10BASE-T/100BASE-TX-type networks via an Ethernet network cable. For the detailed settings and devices needed to connect to the network, consult your Network Administrator. The default settings make your computer able to connect to the network. For more information about connecting your notebook to the network, please consult the Hardware troubleshooting section of the VAIO-Link website: How to troubleshoot network problems Do not plug a phone cable into your computer network jack.

  • Page 85: Getting Help

    Getting help Getting help This section describes how to get help and support from Sony, and provides troubleshooting tips for your computer. Sony support options Sony provides several support options for your computer. If you want more information on the printed and on-line manuals, please see Documentation pack (page 11).

  • Page 86: Troubleshooting

    Getting help Troubleshooting This section describes how to solve common problems you might encounter when using your notebook. Many problems have simple solutions. Please, try these suggestions before contacting VAIO-Link. About the computer and software About the display About CD-ROMs and floppy disks About sound About the modem About peripherals...

  • Page 87: About The Computer And Software

    If the floppy disk drive is empty, proceed as follows to initialise the BIOS: Turn off the computer. Remove any peripheral devices connected to the computer. Turn on the computer and press <F2> when the Sony logo appears. The BIOS setup menu screen appears. Set the date (month/day/year).

  • Page 88: Power Button

    Getting help Press Enter. Press the arrow keys to select System Time. Set the time (hour:minute:second). Press Enter. Press the arrow keys to select the Exit menu. Press the arrow keys to select Get Default Values and then press <Enter>. The message Load default configuration now? appears.
  • Page 89 Getting help My computer locks up If you suspect one application is locking your system, you can try to stop it. To do this, press <Ctrl>+<Alt>+<Delete> simultaneously. If you have not changed the default settings, you will enter the Task Manager. Select the application or process that is locking your system, and then click End Task. If the above method does not work or you do not know which application is locking your system, restart the computer.
  • Page 90 Getting help My mouse does not work If you are using an optional Sony USB mouse, check that the appropriate driver and software are properly installed. Check that the USB mouse is plugged into the USB connector. Can I burn an audio CD with SonicStage? It is possible to burn an audio CD using SonicStage with the built-in CD-R module.

  • Page 91: About The Display

    Getting help About the display My LCD does not display anything Check that the computer and display are both plugged into a power source and that they are turned on. Check that the power indicator on the front panel of the computer is on. Check that the battery packs are inserted properly and that they are charged.

  • Page 92: About Cd-Roms And Floppy Disks

    Getting help About CD-ROMs and floppy disks My CD-RW/DVD-ROM drive tray does not open Make sure the computer is turned on. Press the eject button on the disc drive. If the disc does not come out when you press the eject button, go to Windows Explorer or My Computer.
  • Page 93 Getting help I cannot play a DVD-ROM If a region code warning appears when you are using the DVD player, it could be that the DVD-ROM you are trying to play is incompatible with the DVD-ROM drive on your notebook. The region code is listed on the packaging of the disc.
  • Page 94 Getting help My USB floppy disk drive cannot write to a floppy disk The floppy disk is write-protected. Disable the write-protect feature or use a floppy disk that is not write-protected. Check that the disk is properly inserted into the floppy disk drive. Your disk may be corrupt.
  • Page 95 Getting help The optional PCGA-UFD5/A (USB) floppy disk drive is not recognised as drive A To set the UFD5/A to A, proceed as follows : Turn the system power on. Connect the UFD5/A. Select Control Panel from the Start menu. Double-click System.

  • Page 96: Microphone Connector

    Getting help About sound My speakers are not producing sound The built-in speakers may be turned off. Press <Fn>+<F3> to turn on the speakers. The speaker volume may be turned to the minimum. Press <Fn>+<F4>, and then press increase the volume. If your computer is powered by battery, check that the battery is inserted properly and that it is charged.

  • Page 97: About The Modem

    Getting help About the modem My internal modem does not work Check that the phone line is plugged into your computer. Check that the phone line is working. You can check the line by plugging in an ordinary phone and listening for a dial tone.

  • Page 98: About Peripherals

    Make sure the PC Card is compatible with your version of Windows Use the Sony Notebook Setup utility to disable devices you are not currently using. If you are using two PC Cards, use the Sony Notebook Setup utility to disable the devices you are not currently using.
  • Page 99 Getting help Try a printer self test (if available) to see if the printer itself is still working properly. For more information, please consult the manual supplied with your printer. Some printers have a specific installation procedure. Please check the manual supplied with your printer.

  • Page 100: About Digital Video Captures And Dvgate

    Getting help About digital video captures and DVgate While I am recording images to a digital video device using DVgate, my system displays the message 'Recording to DV device failed. Check the power and cable connections to the DV device and try the operation again...' Close all open applications and restart your computer.

  • Page 101: About Power Management

    Getting help About power management The power management setting is not responding Your notebook’s operating system may become unstable if a lower power state, such as Hibernate is initiated, and then changed before the notebook completely enters the lower power state. To restore the notebook to its normal operating stability, proceed as follows: Close all open applications.

  • Page 102: About I.link™ Devices

    Getting help About i.LINK™ devices I cannot establish an i.LINK™ connection between two VAIO computers Disconnect then reconnect the i.LINK™ cable. If you still have no connection after waiting for a while, restart both computers. If either computer has just returned from a power saving mode, the connection may be affected. In this case, make sure you perform a full restart before connecting them.
  • Page 103 Getting help About Wireless LAN I cannot use the Wireless LAN function Check if the Wireless switch on the front side of the machine is turned on. The Wireless LAN Access Point and your computer cannot communicate Check if the Wireless LAN switch on the front side of the computer is turned on. Check if the power of the Access Point is turned on.
  • Page 104 Getting help I cannot access the Internet Check the settings of the Access Point. See the manual of the Access Point. Check if your computer and the Access Point are communicating. Make the distance between the Access Point and your machine smaller. The maximum communication speed is not reached The maximum communication speed is 11 Mbps, but this can never be reached.

  • Page 105: Adding And Removing Memory

    Precautions Precautions This section describes safety guidelines and precautions to help you protect your computer from potential damage. Your notebook and memory modules use high precision components and electronic connectors technology. To avoid the invalidation of your guarantee by mishandling, it is recommended that: You contact your dealer to install a new memory module.
  • Page 106 Precautions Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory module only at an ESD workstation. If such a station is not available, do not work in a carpeted area, and do not handle materials that produce or hold static electricity (cellophane wrappers, for example). Ground yourself by maintaining contact with an unpainted metal portion of the chassis while performing the procedure.
  • Page 107 Precautions Changing or adding a memory module To change or add a memory module, proceed as follows: Shut down your computer and disconnect all peripheral devices. Unplug the computer and remove the battery pack. Wait until the computer cools down. Unscrew the two screws at the bottom of your computer, next to the release lever of the battery pack.

  • Page 108: Keyboard

    Precautions Introduce a sharp object (such as a fine screwdriver) between the keys indicated on in the picture (1) and push gently upwards. Lift the keyboard from the LCD display side and gently turn it over the touchpad. Be careful not to detach the cable (1) when lifting the keyboard.
  • Page 109 Precautions Remove the memory module: Pull the tabs in the direction of the arrows. The memory module is released. Pull the memory module in the direction of the arrow. Remove the new memory module from its packaging. Install the memory module. Be careful not to touch the other components on the motherboard.
  • Page 110 To view the amount of memory, proceed as follows: Turn on the computer. Go to Sony Notebook Setup via the Start menu. The Sony Notebook Setup dialog box appears. In the About this Computer tab you can view the amount of system memory. If the additional memory...

  • Page 111: Other Precautions

    Precautions Other precautions On handling the hard disk The hard disk has a high storage density and reads or writes data in a short time. On the other hand, it may be easily damaged by mechanical vibration, shock or dust. Although the hard disk has the safety device in itself to prevent losing data due to mechanical vibration, shock or dust, you should be careful when handling your computer.
  • Page 112 Precautions A residual image may appear on the screen if the same image is displayed for a lengthy period of time. The residual image disappears in a while. You can use a screensaver to prevent residual images. The screen becomes warm during operation. This is normal and does not indicate a malfunction. The LCD is manufactured using high-precision technology.

  • Page 113: Speakers

    Precautions Do not drop the computer or place heavy objects on top of the computer. Do not place your computer in a location subject to: Heat sources, such as radiators or air ducts, Direct sunlight, Excessive dust, Moisture or rain, Mechanical vibration or shock, Strong magnets or speakers that are not magnetically shielded, Ambient temperature of more than 35°C or less than 10°C,...
  • Page 114 Precautions As you may lose important data once your computer is damaged, you should back up your data regularly. Restore the original application programs from the Product Recovery CD-ROM. On handling floppy disks Do not open the shutter manually or touch the surface of the floppy disk. Keep floppy disks away from magnets.
  • Page 115 Precautions On using the battery pack Never leave the battery pack in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight. Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures.
  • Page 116 Precautions On using headphones Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings.
  • Page 117 Glossary Glossary This section refers to terms used in this manual. These terms and definitions have been compiled to provide you with a better understanding of your VAIO computer. Term <F1> key 10BASE-T/100BASE-TX ACPI Application recovery Application recovery CD-ROM BIOS CardBus Definition The <F1>...
  • Page 118 Glossary Term CD-ROM CD-RW DC In Docking station Driver DVD-ROM Ethernet Definition Abbreviation for Compact Disc Read-Only Memory. A high-capacity optical disc, usually 650 MB in size, capable of being read from but not written to. Short for Compact Disc-ReWriteable. Compact Disc that can be used to write or rewrite data to it.
  • Page 119 The EULA can be found in the Read this first section at the beginning of the software guide or directly on the VAIO desktop. i.LINK™ is Sony’s version of the IEEE 1394 standard for high-speed digital serial interface. The standard is regarded in the audio/video and IT industries as the most suitable interface for connecting computers and digital audio/video devices (such as digital cameras etc.).
  • Page 120 Glossary Term MAPI maximum RAM Motherboard MPEG Operating system Partition Definition Short for Messaging Application Program Interface. A Microsoft Windows interface enabling you to send e-mail messages. It allows e-mail access and distribution among applications. MAPI-compatible applications include a Send Mail or Send in the File menu of the application.
  • Page 121 Glossary Term PC Card PCMCIA Pixel Port replicator Processor Product recovery CD-ROM PS/2 PSTN Definition A PCMCIA card. The term PC Card is more widely used than PCMCIA. See PCMCIA. PCMCIA (Personal Computer Memory Card International Association) is the name of the group that produced the specification for the credit card-sized plug-in boards for laptop computers.
  • Page 122 Glossary Term Resolution RGB signal cable SDRAM Standard RAM System recovery System recovery CD-ROM Definition Short for Random Access Memory, the memory used to run programs and store data in current use. RAM is the fastest kind of memory to read from and write to. Information stored in RAM is lost when you turn off the computer.
  • Page 123 You can connect up to 127 devices to a USB port. The USB standard is Hot Plug and Play. Short for Video Audio Integrated Operation. Brand name covering Sony's PC products, peripherals, accessories and software. VAIO-branded items are all designed to make the best use of Sony's Audio-Video (AV) and Information Technology (IT) skills.

This manual is also suitable for:

Pcg-z1spPcg-z1mpPcg-z1rmpPcg-z1rsp

Table of Contents