Table of Contents
Advertisement
Using your notebook
For some PC Cards, if you alternate between Normal power operation and Standby or Hibernate power management modes while the card is
inserted, you may find that a device connected to your system is not recognised. Reboot your system to correct the problem.
The computer will return to its original state if you restart it.
Removing a PC Card
Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your
system may not work properly. If you want to remove a PC Card when your computer is off, skip steps 1 to 7.
To remove a PC Card, proceed as follows:
1
Double-click the Safely Remove Hardware icon in the system tray.
The Safely Remove Hardware dialog box appears.
2
Select the hardware you want to unplug.
3
Click Stop.
4
In the Stop a Hardware Device dialog box,
confirm that the device can be safely
removed from the system.
5
Click OK.
A dialog box appears, explaining that it is
safe to remove the device.
6
Click OK.
7
Click Close.
8
Eject the PC Card release button (1) and then
press it to eject the card.
9
Gently press the card and pull it out.
✍
If you unplug the PC Card from the computer when it is still turned on, your system might crash and you might lose data that you did not save before.
n N
39
Advertisement
Table of Contents
