Philips 27PT41B1 Quick Use And Installation Manual

Model 27PT41B1
Color Television and Remote Control
C TV
ABLE BEGIN
is a single, round cable
C I /C
ABLE NPUT ONVERTER
(75 ohm), then you're ready to
Y our Cable TV input into
connect to the TV.
your home may be a
If you have a cable converter
single (75 ohm) cable or a box, connect the cable TV signal
to the cable signal IN(put) plug
converter box installation.
on the converter.
In either case, the connec-
tion to the TV is very easy.
Just put the threaded end
of the cable signal to the
TV's antenna plug and
screw it down tightly.
NOTE: The connecting cable
for the converter is supplied
by the cable TV company.
A
NTENNA
BEGIN
round cable (75 ohm) on the end,
C UHF/VHF
OMBINATION
then you're ready to connect it to
A combination antenna
the TV.
receives normal broad-
If your antenna has flat, twin-
cast channels (VHF 2–13
lead wire (300 ohm), you first need
to attach the antenna wires to the
and UHF 14–69). Your
screws on a 300- to 75-ohm
connection is easy because
adapter.
there is only one 75Ω
(ohm) antenna plug on the
back of your TV, and that's
where the antenna goes.
1
Combination VHF/UHF
Twin–Lead
Antenna
Wire
(Outdoor or Indoor)
Round Cable
75Ω (Ohm)
TV VCR
TO
BEGIN
na or cable TV signal to the
B C
ASIC ONNECTION
IN FROM ANT(enna) plug on
F ollow the steps to the
the VCR.
right to connect a
basic antenna or cable TV
Outdoor
signal to a VCR, and then
VHF/UHF
Antenna
the VCR to the TV. For
information on other
hookups (possible when
cable/descrambler boxes
are included), refer to the
owner's manuals for the
Cable TV signal
VCR and the cable con-
verter.
All manuals and user guides at all-guides.com
Q
UICK
Getting Started
Warning/Precautions ..................................1
Hooking Up Your TV ................................1
Basic TV and Remote Control Operation .................2
How to Use the Install Controls ...........................3–4
Using the Language Control......................................3
Setting the Tuner Mode .............................................3
Setting the TV to Auto Program Channels ................3
Using the Channel Edit Control ................................4
Setting the Channel Name Control............................4
How to use the AutoChron™ control........................4
If your Cable TV signal
Connect the cable TV cable to the
ANTENNA/CABLE plug on the TV.
If you have a cable converter box,
connect the OUT(put) plug from the
converter to the 75Ω (ohm) plug on the
TV.
Cable TV Company
Cable TV Signal Input
OR
Round Cable
75Ω (Ohm)
Cable TV Converter
Box Connection
Push the round end of the
If your antenna has a
adapter (or antenna) onto the
75Ω (ohm) plug on the back of
the TV. If the round end of the
antenna wire is threaded, screw
it down tightly.
300Ω (Ohm) to
75Ω (Ohm) Adapter
ANT 75Ω
OR
Connect the OUT TO
Connect your anten-
TV plug on the VCR to the
75Ω (ohm) plug on the TV
(connecting cable supplied
with the VCR).
300Ω (Ohm) to
75Ω (Ohm) Adapter
1
OR
IN FROM ANT. OUT TO TV
VCR
U I
SE AND NSTALLATION
T C
ABLE OF ONTENTS
• For details on product registration, warranty,
and service, refer to the other literature included
with your TV information packet.
Please retain all these materials and keep them
handy for future reference.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.
NOTE: This Quick Use Guide may be used with
other models. Some of the features listed may or
may not apply to your TV.
2
ANT 75Ω
VIDEO
ANT 75Ω
L
AUDIO
R
Back of TV
1
NOTE: For homes with separate UHF and
VHF antennas, you will need an optional com-
biner to connect to the TV.
U/V
Combiner
2
8 8
M-Link
+ R – – L +
SURROUND SOUND
Monitor out AV1 in AV2 in
ANT 75Ω VIDEO
Y
L
AUDIO Pb S-VIDEO
R Pr
Back of TV
Refer to the owner's
manual included with your
VCR for other possible con-
nections and TV/VCR operat-
ing details.
Round Cable
75Ω (Ohm) Supplied with VCR
2
ANT 75Ω
1
G
UIDE
S
MART
H
ELP
Remember
to set the TV for the
type signal to which
you've just connect-
ed (see the "Tuner"
section on page 3).
To select only the
channel numbers on
your cable system,
see "Auto Program"
8 8 (page 3). If you use a
M-Link
+ R – – L +
SURROUND SOUND
Monitor out AV1 in AV2 in
Y
Pb S-VIDEO cable converter box,
Pr
set the TV to the
same channel as the
converter's CH 3/4
switch (on the back
of the converter).
S
MART
H
ELP
Remember, be
sure to set the TV for
the type of signal to
which you've connected
(see the "Tuner" section
8 8 M-Link
+ R – – L +
SURROUND SOUND
VIDEO Monitor out AV1 in AV2 in
ANT 75Ω L Y
AUDIO Pb S-VIDEO
R Pr
on page 3).
Back of TV
To set the TV to select
only the channel numbers
300- to 75-Ohm Adapter
in your area, see how to
"Program" or "Add"
channels in memory on
page 3 ("Auto Program"
section).
Contact your dealer,
or call our Parts
Information Center at
1-800-851-8885 to order
the following acces-
sories:
• 300Ω (ohm) to 75Ω
(ohm) adapter
• Combination
VHF/UHF antenna.
8 8
M-Link
+ R – – L +
SURROUND SOUND
Monitor out AV1 in AV2 in
ANT 75Ω VIDEO
Y
L S-VIDEO
AUDIO Pb
R
Pr
Back of TV
3135 015 17701