Table of Contents
Advertisement
Power supply p.c.b.
BS 397 Vertical deflection p.c.b.
BS
Synchro. separator and
pincushion correction
p.c.b.
BS 395 Horizontal deflection
p.c.b.
BS 418 CRT p.c.b.
DC voltage available at five
outputs with values of: +2OOV;
These voltages are
stabilized and separated from
the mains.
voltage at frame frequency which
is used for driving the vertical
deflection yoke. It supplies a
similar voltage to the
synchro. separator p.c.b. to
obtain the E/W pincushion
correction.
It supplies a frame frequency
pulse which is used for the
luminance, chrominance and video
amplifier p.c.b. blankings. It
receives the vertical synchro.
from the synchro. separator
p.c.b. and receives from the
chassis a voltage proportional
to the beam current.
signal. Said process consists in
separating the horizontal
signals from the video composite
signal. The "pincushion
sawtooth shaped signal and
converts it into a parabolic
shape for E/W correction.
sequence at line frequency and
drives a circuit operating as
an ON-OFF switch for supplying
the deflection current to the
horizontal yoke. It also
receives the parabolic signal
which acts on the diodes
modulator for E/W correction.
No adjustments needed.
It includes protection and
matching circuits for the three
signals (red, green and blue)
with relevant voltage
dischargers. In series to each
signal circuit a switch is
provided for black level
adjustment.
Advertisement
Table of Contents
