Listening To The Sound Without Any Adjustment (Analog Direct); Resetting Sound Fields To The Initial Settings - Sony STR-DH500 Operating Instructions Manual

Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input
to two channel analog input. This function
enables you to enjoy high quality analog
sources.
When using this function, only the volume and
front speaker balance can be adjusted.
?/1
INPUT SELECTOR
MEMORY/
INPUT MODE TUNING MODE TUNING ENTER
PHONES
INPUT 2CH/
SELECTOR A.DIRECT
1
Turn INPUT SELECTOR on the
receiver to select the input you
want to listen to in analog
audio.
You can also use the input buttons on the
remote.
2
Press 2CH/A.DIRECT
repeatedly to select
"A. DIRECT".
The analog audio is output.
To cancel ANALOG DIRECT
Press 2CH/A.DIRECT on the receiver again.
You can also press any sound field buttons.
Notes
• When headphones are connected, "HP DIR"
appears on the display.
• You cannot select ANALOG DIRECT when you
select BD, DVD and DMPORT as input.
MASTER VOLUME
2CH/
A.DIRECT A.F.D. MOVIE MUSIC DISPLAY DIMMER MUTING
Sound field
buttons
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
?/1
?/1
INPUT SELECTOR
MEMORY/
INPUT MODE TUNING MODE TUNING ENTER
PHONES
2CH/A.DIRECT
1
Press ?/1 to turn off the power.
2
While holding down 2CH/
A.DIRECT, press ?/1.
"S.F. CLR." appears on the display and
all sound fields are reset to their initial
setting.
MASTER VOLUME
2CH/
A.DIRECT A.F.D. MOVIE MUSIC DISPLAY DIMMER MUTING
49 GB