Changing The Screen Size - Samsung SPM4227 Owner's Instructions Manual

Changing the Location of the PIP Image
Press the Menu button. Move the joystick up or
1
down to select "PIP", then press the joystick to
enter.
!
Quick way to access the PIP location: Just press
"Locate" in the cover on the remote control.
Move the joystick up or down to select "Locate",
2
then move the joystick left or right to enter.
Move the joystick to move the PIP screen where you
3
want.
Press the Menu button to exit.
4
28
PIP
Select On
Locate
Source
Move Adjust Exit
PIP
Select On
Locate
Source
Move Adjust Exit
PIP
Adjust Exit

Changing the Screen Size

(When entering the Video mode)
When you press the Aspect button on the remote control, the PDP's screen mode should appear in
sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Stretch, 4:3.
Note
• If you watch a still image or the 4:3 mode for a long time(over 2 hours), an image may be burned
onto the screen, view the monitor in wide or panorama mode as much as possible.
Wide
Sets the picture to 16:9 wide mode.
Panorama
Converts regular 4:3 aspect ratio screen to
widescreen.
Zoom1
Magnifies the size of the picture vertically on
screen.
Note
• In VIDEO, S-VIDEO and Component1(480i) modes, all screen modes can be selected.
(Wide Panorama Zoom1 Zoom2 Stretch
Zoom2
Magnifies the size of the picture more than
Zoom1.
Stretch
Moves the Zoom2 picture up a little to fully
show the bottom. Use this picture size if you
want to view the Zoom2 picture along with
captions when watching movies.
Caption
4:3
Sets the picture to 4:3 normal mode. This is a
standard PDP screen size.
4:3).
29