Changing The Display - Sony STR-DE495 Operating Instructions Manual

Selecting the component
(continued)
PHONES
Use to connect headphones.
• When the headphones are connected, speaker
output is automatically canceled and "SP"
(STR-DE495 only) or "SP A" and "SP B"
(STR-DE595 only) do not light up in the
display.
SPEAKERS (OFF/A/B/A+B)
(STR-DE595 only)
Press SPEAKERS (OFF/A/B/A+B) to output
the sound from the speakers connected to the
SPEAKERS FRONT terminals.
Each time you press the button, the display will
light up cyclically as follows:
SP A t SP B t SP A and SP B t
No display*
To drive
Speaker System A
(Connected to the
SPEAKERS FRONT A
terminals)
Speaker System B
(Connected to the
SPEAKERS FRONT B
terminals)
Both Speaker System
A and B
(Connected to the
SPEAKERS FRONT A
and B terminals)
* If you do not want to drive Speaker System A and
B, press SPEAKERS (OFF/A/B/A+B) until "SP A"
and "SP B" do not light up in the display (no
display).
GB
22
Select
SP A (default setting)
SP B
SP A and SP B

Changing the display

DIMMER
Press DIMMER repeatedly to adjust the
brightness of the display (3 steps).
However, when you press any button, the
display becomes the brightest setting
temporary.
DISPLAY
Each time you press DISPLAY, the display
changes cyclically as follows:
Index name of the component* t Selected
component t Sound field applied to the
program source
When the tuner is selected
Index name of the preset station* or program
station name** t Frequency t Program type
indication** t Radio text** t Current
time** t Sound field applied to the band or
the preset station
* Index name appears only when you have assigned
one to the component or preset station (page 34).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input selector.
** During RDS reception only. (Models of area code
CEL, CEK only. See page 32.)