Download
Share
Print this page
  1. Manuals
  2. Brands
  3. babymod Manuals
  4. Indoor Furnishing
  5. 6922
  6. Assembly and operation manual

babymod 6922 Assembly And Operation Manual

Drawer dresser
Hide thumbs

Advertisement

Quick Links

Download this manual
Drawer Dresser (6922) Assembly and Operation Manual
Congratulations on purchasing this product. This product will provide many years of service if you
adhere to the following guidelines for assembly, maintenance, and operation. This product is for resi-
dential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for
assembling the product. Do not use power screwdrivers. All of our products are made from natural
woods.
Please understand that natural woods have color variations which are the result of nature and not
defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD-
WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLIS-
TIC VARIATIONS.
Page 1
revised23DEC2014

Advertisement

loading

Related Manuals for babymod 6922

Summary of Contents for babymod 6922

  • Page 1 Drawer Dresser (6922) Assembly and Operation Manual Congratulations on purchasing this product. This product will provide many years of service if you adhere to the following guidelines for assembly, maintenance, and operation. This product is for resi- dential use only. Any institutional use is strictly prohibited.
  • Page 2 PARTS A. Leg (4) B. Base Frame C. Wood Cleat D-1. Left side panel D-2. Right side panel E. Top panel F-1. Back Top Support Rail F-2. Back Center Support Rail F-3. Back Bottom Support Rail F-4. Front Bottom Support Rail G-1.

  • Page 3: Tools Needed

    HARDWARES N-1. Left Side Glide (4) Tools Needed (not included) N-2. Left Drawer Glide (4) N-3. Right Side Glide (4) N-4. Right Drawer Glide (4) Phillips screwdriver Q. 1-1/8” Phillips O. Cam Bolt (18) P. Cam Lock (18) Round Head Bolt (4) S.
  • Page 4 STEP 3. Attach four left side glides (N-1) to the left panel (D-1) and four right side glides (N-3) to right panel (D-2) using small screws (W) as illustrated. Do not overtighten the screws. STEP 4. Insert 8mm wood dowels (T) into both ends of four F-1, F-3, F-4 support rails (F-1, F-2, F-3 and F-4).
  • Page 5 Attach the support rails (F-1, F-2, F-3 and F-4) to the left side panel (D-1) as illustrated. Secure the sup- port rails and left side panel by turning cam locks (P) clockwise with a Philips screwdriver. STEP 6. Repeat the procedures in step 5A and step 5B. Set up the right side panel (D-2) as the illustration shown.
  • Page 6 STEP 8. Screw four cam bolts (O) into the top panel (E). STEP 9. Lightly land the top panel (E) onto the side panel (D-1, D-2) assembly. Make sure that all the cam bolts (O) and 8mm wood dowels (T) fit their holes. Secure the attachment by rotating four cam locks (P) as illustrated.
  • Page 7 STEP 11. Lightly land the dresser onto the base frame (B) as illustrated. Make sure that the 8mm wood doewl (T) at the wood cleat (C) fit its holes at the front bottom support rail (F-4). Secure the side panels (D-1, D-2) to the base frame (B) using four 1-1/8”...
  • Page 8 Attach the two drawer side panels (J and K) and drawer back panel (L) by screwing 1-1/4” wood screws (V) into the holes on side panels as the illustration shown. Slide the drawer bottom panel (I) into the grooves in the sides and back of the drawer. Be sure it goes all the way into the groove in the drawer back.
  • Page 9 STEP 14. Repeat the procedures from step 12A to step 13 to set up the four drawers. Put the four finished drawers into the dresser and check that they glide smoothly. Page 9...

  • Page 10: Tools Needed (Not Included)

    STEP 15. FURNITURE ANTI-TIPPING KIT INSTALLATION Serious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the steps below to install this anti-tipping strap. WARNING Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over: Place heaviest item in the lowest drawers.
  • Page 11 Install the other end of strap on the back of dresser with short screw and washer into the wood framing of the dresser. Finish KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT. KEEP THE INSTRUCTIONS FOR FUTURE USE.