AEG T9DEN87CC User Manual page 20

WI-FI - CONNECTIVITY SETUP
in remote mode each programme and option selection from
extended application list is signalled by
display.
Remote control activation
To operate remotely the tumble dryer you must activate this
function on the appliance control panel.
To enable the remote control:
1. Check wireless connection between the appliance and smart
device.
The symbol
accessible from My AEG application.
2. Touch and hold down the Droogtijd and Startuitstel buttons
the same time.
The symbol must
enabled.
Another possibility to enable remote control is to touch Start/Pauze
button. The symbol must
is enabled.
Remote control deactivation
To disable the remote control:
Touch and hold down the Droogtijd and Startuitstel buttons
same time.
The symbol must
disabled.
20/64
must be on the display and your appliance must be
appear on the display. Remote control is
appear on the display. Remote control
disappear from the display. Remote control is
symbol on the
at
at the