Related Manuals for Panasonic EY6409NQKW
Summary of Contents for Panasonic EY6409NQKW
- Page 1 Variable Speed Drill & Driver Model: EY6405/EY6409/EY6432 IMPORTANT This manual contains safety information. Read manual completely before first using this product, and save this manual for future use.
-
Page 2: General Safety Rules For All Battery Operated Tools
I. GENERAL SAFETY RULES FOR ALL BATTERY OPERATED TOOLS WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. • Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area 1) Keep your work area clean and well lit. -
Page 3: Specific Safety Rules
A tool that cannot be controlled with the switch is dangerous and must be repaired. 15) Disconnect battery pack from tool or place the switch in the locked or off position before making any adjust- ments, changing accessories, or storing the tool. Such preventive safety... - Page 4 III. FOR BATTERY CHARGER & BATTERY PACK SAVE THESE IN- STRUCTIONS manual contains important safety and operating instructions for battery charger EY0230. 2) Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery pack. CAUTION -To reduce the risk of injury, charge only Battery Pack shown...
- Page 5 19) The charger is designed to operate on standard household electrical power only. Do not attempt to use it on any other voltage! 20) Do not abuse cord. Never carry charger by cord or yank it to disconnect from outlet. Keep cord away from heat, oil and sharp edges.
-
Page 6: Functional Description
IV. FUNCTIONAL DESCRIPTION * EY6405 is referred for illustration. Keyless drill chuck Forward / Reverse lever Speed selector switch Battery pack (EY9106/EY9200/EY9201/ EY9136/EY9230/EY9231) Battery charger (EY0230) Clutch handle Variable speed control trigger Bit holder Battery pack release button — —... -
Page 7: Operation
V. ASSEMBLY Attaching or removing bit Note: When attaching or removing a bit, be sure to set the Forward/Reverse lever to its cen- ter position (switch lock). This tool is equipped with a keyless drill chuck. 1. Attachment Insert the bit and turn the lock collar clockwise (looking from the front) to tighten. -
Page 8: Clutch Torque Setting
Clutch Torque Setting Adjust the torque to one of the 18 possible set- tings or “ ” position to the job. CAUTION: Test the setting before actual opera- tion. Set the scale at this mark ( Note: When the brake operates, a braking sound may be heard. -
Page 9: Lamp Indications
5. When in any of the conditions that battery pack is too cool, or the battery pack has not been used for a long time, the charging lamp starts flashing slowly to indicate protective charging. Protective charging takes longer to fully charge the battery pack, than the stan- dard charging time. -
Page 10: Battery Pack
IX. ACCESSORIES Use only bits suitable for size of drill’s chuck. MAXIMUM RECOMMENDED CAPACITIES Model Machine screw Screw Wood screw driving Self-drilling screw For Wood Drilling For Metal X. SPECIFICATIONS MAIN UNIT Model EY6405 Motor No-load Speed High 0.5 mm ~ 10 mm Chuck Capacity (1/32"... - Page 11 ATTENTION For Ni-Cd Battery Packs, EY9106, EY9136 A nickel cadmium battery that is recyclable powers the product you have purchased. At the end of its useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream.
- Page 12 30-DAY QUALITY SATISFACTION GUARANTEE: If you are dissatisfied with any Panasonic Cordless Power Tool for any reason, sim- ply return it to the place of purchase with a dated proof of purchase, in the original packaging, with all accessories, parts...