Cabinet (R) Section; Cabinet (R) Assembly - Sony HXR-NX80 Service Manual

3-9.

Cabinet (R) Section

3-9-1.

Cabinet (R) Assembly

Preparation
1. Remove the cabinet (G) assembly. (Refer to
2. Remove the heat sink (GP) assembly. (Refer to
3. Remove the top cabinet assembly. (Refer to
4. Remove the EF-1003 board. (Refer to
5. Remove the IR cabinet assembly. (Refer to
6. Remove the inner mold (T) assembly. (Refer to
Procedure
1. Disconnect the flexible flat cable from the connector (CN4104) on the VC-1045 board.
Flexible flat cable
Note
When installing the lens cover assembly, arrange the flexible flat cable as shown in the figure.
HXR-NX80/HXR-MC88
"3-2. Cabinet (G) Assembly".)
"3-3. Heat Sink (GP)
"3-5. Top Cabinet Assembly".)
"3-6. EF-1003 Board".)
"3-7. IR-1009 Board".)
"3-8. Inner Mold (T)
CN4104
(VC-1045 board)
Assembly".)
Assembly".)
Arrangement of flexible flat cable
3-17