Get Started; Charging The Battery; Charge Via Usb Power Supply Unit; Charge Via Docking Station - Philips SpeechMike Premium Air SMP4000/00 User Manual

3 Get started

Caution
• Before you connect your SpeechMike, first read the
safety instructions (see Safety

Charging the battery

Charge the built-in battery before you use the device
for the first time or if you haven't used it for an extended
time period. If the battery is completely discharged and
your device turns off, allow the battery to charge for a
while before you turn on the device.
A complete recharge cycle takes about 4.5 hours.
Note
• The included USB power supply unit is a US standard
power supply. Depending on your region, you might
need to use the supplied outlet adapters to fit
regional power outlets.
Caution
• Use only the original power supply unit. Using a
different power supply unit may damage the device.

Charge via USB power supply unit

X During charging, the battery LED glows orange.
X When charging is complete, the battery LED glows
green.
8 Get started
instructions).
CLICK

Charge via docking station

Note
• If you charge your device via docking station, make
sure that the micro USB connector is connected to the
USB port for charging marked with 5V DC.
X During charging, the battery LED on the
SpeechMike and on the docking station glow
orange.
X When charging is complete, the battery LED on
the SpeechMike and on the docking station glow
green.
Caution
• Make sure that there are no metallic parts in the
docking station, otherwise the charging process is not
possible. In this case, the battery LED on the docking
station starts flashing red.
Note
• The SpeechMike might get warm when charging it in
the docking station. This is normal, especially when
you are charging the device for a longer time.
CLICK