Using Other Equipment; Using An External Unit; Operating A Television - Panasonic SC-PM91D Operating Instructions Manual

Using other equipment

Before connection
• Disconnect the AC power supply cord.
• Turn off all equipment and read the appropriate operating instructions.
• The equipment connections described are examples only.
Home Theater — Enjoying more powerful sound
Enjoy the powerful movie theater and hall-like sound available with
multiple channel audio found on DVD-Video by connecting an amplifier
DVD-A
and speakers. ( Even if using this connection, output will be only 2
channels.)
Amplifier
(DVD) IN
Optical digital audio cable
Do not bend sharply when
connecting.
FM ANT
AM ANT
EXT LOOP 75 Ω
AUX
R L
SUBWOOFER
OUT
L
OPTICAL
R
OUT
HIGH (6Ω) LOW (6Ω)
SPEAKERS (SB-PM91)
HAUT-PARLEURS
S-VIDEO
OUT
VIDEO
OUT
P P Y
R B
COMPONENT VIDEO OUT
To enjoy multi-channel surround sound
Connect an amplifier with a built-in decoder or a decoder-amplifier
combination.
Change the settings in "Audio" tab (➡ page 22).
• You can only use DTS Digital Surround decoders that are compatible
with DVD.
Recording Output
• With DVD, the following conditions must be met:
– the disc doesn't have protection preventing digital recording
– the recording equipment can handle signals with a sampling
frequency of 48 kHz
• You cannot record WMA/MP3.
When recording DVDs, make the following settings.
– Advanced Surround: SURR OFF (➡ page 26)
– PCM Digital Output: Up to 48 kHz (➡ page 22)
– Dolby Digital and DTS Digital Surround: PCM (➡ page 22)
Speakers (example)
Connect three or more
speakers for surround
sound.
AC IN
➡ Page 11 for the position of the remote control buttons.
Peripheral cables and equipment are sold separately
unless otherwise indicated.

Using an external unit

You can playback the sound from a video cassette recorder, tape deck,
laser disc player, etc., through this unit's speakers.
Audio cable
FM ANT
AM ANT
EXT LOOP 75 Ω
AUX
R L
SUBWOOFER
OUT
L
OPTICAL
R
OUT
HIGH (6Ω) LOW (6Ω)
SPEAKERS (SB-PM91)
HAUT-PARLEURS
When connecting a record player
S-VIDEO
OUT
VIDEO
OUT
We recommend using a record player with a built-in phono equalizer.
If your player doesn't have a built-in equalizer, connect it first to a
P P Y
R B
COMPONENT VIDEO OUT
separate equalizer and then connect that to this unit.
To play
1
Press [TUNER/AUX] to select "AUX".
The unit comes on.
Every time you press the button:
FM → AM → AUX
2
Start playback from the external source.
(For details, refer to the external unit's instruction manual.)

Operating a television

Face the remote control at the television for the following operations.
Turning the television on/off
Press [SHIFT] + [TV^].
Switching the television's video input mode
Press [SHIFT] + [TV/VIDEO].
Changing channels
Press [SHIFT] + [TV CH 1] or [SHIFT] + [2 TV CH].
Adjusting the volume
Press [SHIFT] + [– TV VOL] or [SHIFT] + [TV VOL +].
Note
Some models cannot be operated by this remote control.
Video cassette recorder
AC IN
29