Intended use e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord Your Black & Decker drill/screwdriver CP12/CP14 has been suitable for outdoor use reduces the risk of electric shock. designed for screwdriving applications and for drilling in wood, f.
Page 5
d. Store idle power tools out of the reach of children and Hold power tool by insulated gripping surfaces when do not allow persons unfamiliar with the power tool or performing an operation where the cutting accessory these instructions to operate the power tool. Power may contact hidden wiring or its own cord.
Additional safety instructions for batteries and If the supply cord is damaged, it must be replaced by the chargers manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard. Batteries Features Never attempt to open for any reason. ...
Page 7
Battery charge Warning! Let the tool work at its own pace. Do not overload. 1 light 2 lights medium Warning! Before drilling into walls, floors or ceilings, check for 3 lights high the location of wiring and pipes. Selecting the direction of rotation (fig. F) Charging the battery (fig.
To switch the tool on, press the switch (1). The tool speed Should you find one day that your Black & Decker product depends on how far you press the switch. needs replacement, or if it is of no further use to you, do not To switch the tool off, release the switch.
If a Black & Decker product becomes defective due to faulty CP14 CP142 materials, workmanship or lack of conformity, within 24 months Voltage 14.4 14.4 from the date of purchase, Black & Decker guarantees to No-load speed 0-750 0-400/0-1300 replace defective parts, repair products subjected to fair wear Max.