Page 1
User’s Manual TFTV607LEDR 61cm (24”) FHD LED TV with DVB-T 1080p Full HDTV Resoultion LE E E D TV Liquid Crystal Display Offering Australians quality since 1958 www.palsonic.com.au...
Page 2
Important safety information WARNING CAUTION This symbol is intended to tell the user that parts inside the product pose a RISK OF ELECTRIC risk of electric shock to persons. SHOCK; DO NOT OPEN CAUTION: CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT This symbol is intended to tell the user REMOVE COVER.
Page 3
• The openings should never be covered with a cloth or other material, and the bottom openings should not be blocked by placing near or over a radiator or heat source. • This Television equipment should be operated only from type of power source indicated on the marking label.
Page 4
In line with manufacturers and would not mean that the panel is faulty. Dead pixels panels with 6 pixels or more within 12 month period, Palsonic Corporation Pty Ltd. complies with industry standard and reserves the right to repair the unit and non-refundable. We hope you will understand that the product that corresponds to this standard is regarded as acceptable.
Table of Content Overview of the LED TV......Features........Opening the packing......1 Product components......2 Front View..........2 Rear View..........3 Remote control........Using the OSD menus..... Channel Adjustment.......6-9 Picture Adjustment......... Sound Adjustment........11 Feature Adjustment........12 Setup Adjustment........13 Media Operation........14 Specifications........
Overview of the LED TV Congratulation on purchasing the LED Television. This product has been designed to provide you with a rich audio and video experience. This monitor enables you to watch broadcast, cable television or channels, connect VCR, VCD or DVD play- er to watch your favorite movies, or connect a computer to use the display as a monitor.
Product components Front view Remote Inductor and Power Indicator INPUT Switch the input sources . MENU Press the button to enter on screen Display (OSD). Increase or decrease channel numbers. Increase or decrease the volume. POWER Turn the TV on or off.
Rear view COMPONENT 2 DC 12V IN HDMI Headphone DC 12V IN Connect to DC 12V. HDMI Connect to the HDMI output of your device. PC IN Connect to the VGA output of your device. Connect to the audio output of your PC (earphone jack) YPbPr Connect to the component output of your component device.
Remote Control • If direct sunlight shine directly on the remote sensor, remote control’s operation may be unstable, and the effective range will be shorter. • Do not hit or violently shake the remote control. • Never expose the remote control to high temperature or humidity. •...
Page 10
BUTTON FUNCTIONS 1. POWER Turn the TV on or off. 2. TEXT Start the text mode. 3. CANCEL Videotext hidden button. 4. NUMBER Press number keys to enter channel numbers. KEYS Press to display a list of favorite. Disable the audio output. MUTE VOL +/- Press +/- button to control the volume up or down.
Using the OSD MENU The On-Screen Display (OSD) menu system provides a quick and simple method to adjust LED TV base setting. OSD menu can be viewed using both the remote control and the control buttons on the front panel. Channel Adjustment Czech Republic DTV Manual Search...
Channel Adjustment Sub windows info: There are following functions in this page: Channel Management: To manage (Delete/Rename/Swap/Lock/Skip) all channels; Favorite Management: To manage (Add/Delete) Favorite channels; Country: To select country. Auto Search: To select auto search mode (All/Digital/Analogue); Digital Manual Search: To search digital channel by entering parameters manually; Analogue Manual Search: To search analogue channel by entering parameters manually.
Page 13
Channel Adjustment County Austradia Portugal Sweden Finland Czech Repbulic Press ▲/▼ button to select the county that you want. Auto Search All Mode: Select “All” item to scan all digital channels carried by current signal mode firstly and then switch to scan all analog channels in selected country automatically.
Page 14
Channel Adjustment DTV Manual Search Select channel number by “RIGHT” key or entering number directly. The strength and the quality as shows . Press “ENTER” key on “Start” item to start current channel search. The manual searching UI and the auto searching UI are the same. ATV Manual Search ATV Manual Search Analog Parameters...
Picture Adjustment 1. Press MENU button on the front panel or MENU button on the remote control button on the front panel or MENU button on the r to display the main menu. s on the 2. Press ▲/▼ buttons on the remote control or CH button front panel to select the Aicture Setting menu, then press OK...
Sound Adjustment SPDIF 1. Press MENU button on the front panel or MENU button on the remote control to display the main menu. s on the 2. Press ▲/▼ buttons on the remote control or CH button front panel to select the S o u n d Setting menu, then press OK buttons for the submenu.
Feature Adjustment 1. Press MENU button on the front panel or MENU button on the remote control U b tton on the front panel or r or MENU b tton on the r to display the main menu. s on the 2.
Setup Adjustment 1. Press MENU button on the front panel or MENU button on the remote control to display the main menu. s on the 2. Press ▲/▼ buttons on the remote control or CH button front panel to select the Setup Setting menu, then press OK buttons for the submenu.
Media OPERATION N ote:B efore operating Media menu,P lug in U S B device,then press IN P U T button to set the Input S ource to Mdeia. 1 . P ress button to select Media in the S ource menu, then press OK button to enter.
Display I/O ports Active screen size 24 inches HDMI input PC input 16:9 Aspect ratio PC audio input Response time YPbPr input AV input 1920*1080 Resolution RF input Contrast 5000:1 USB input SPDIF output Brightness Viewing angle 178/178(H/V) Other TV Functions User manual √...
Troubleshooting No power • Make sure the TV and the power cord are connected correctly. • Check if you pressed POWER on the remote control unit. If the indicator in the front panel is red, press POWER in the remote control or the front control panel.