Related Manuals for Black & Decker SEASONMASTER BCASK861D
Summary of Contents for Black & Decker SEASONMASTER BCASK861D
- Page 1 BCASK861D www.blackanddecker.co.uk...
-
Page 8: Intended Use
ENGLISH (Original instructions) Intended use Use of an RCD reduces the risk of electric shock. Your BLACK+DECKER BCASK861D SEASONMASTER 3. Personal safety 4-in-1 cordless multi tool system, has been pruning and felling a. Stay alert, watch what you are doing and use common trees and cutting logs and trimming hedges, shrubs and sense when operating a power tool. -
Page 9: Causes And Operator Prevention Of Kickback
(Original instructions) ENGLISH Check for misalignment or binding of moving parts, Hold the power tool by insulated gripping surfaces breakage of parts and any other condition that may only, because the saw chain may contact hidden affect the power tools operation. If damaged, have the wiring. - Page 10 ENGLISH (Original instructions) As a chainsaw user, you should take several steps to keep If for any reason you have to touch the saw chain, your cutting jobs free from accident or injury. make sure your chainsaw is disconnected from the battery.
-
Page 11: Residual Risks
(Original instructions) ENGLISH Should the tool start to vibrate abnormally, immedi- Warning! The vibration emission value during actual use of ately switch it off and remove the battery then check the power tool can differ from the declared value depending for any damage. -
Page 12: Additional Safety Instructions For Batteries And Chargers
ENGLISH (Original instructions) If the supply cord is damaged, it must be replaced by the To ensure continued safe operation, check the manufacturer or an authorised BLACK+DECKER Service chain tension as described in this manual after Centre in order to avoid a hazard. every 10 minutes of use, and adjust back to a clearance of 3 mm as required. -
Page 13: Important Charging Notes
(Original instructions) ENGLISH Bad battery The battery pack should be recharged when it fails to produce sufficient power on jobs which were easily The charger can detect a weak or damaged done previously. DO NOT CONTINUE to use under these battery. - Page 14 ENGLISH (Original instructions) Make sure tool-free tension assembly bolt hole on the Installing and removing chainsaw attachments. (fig cover lines up with the bolt (25) in the main housing as A11) shown in figure A5. To fit an attachment or the extension pole to the base unit Rotate the bar adjust locking knob (23) clockwise until (1), align the attachment/pole base with the power head snug, then loosen knob one full turn, so the saw chain can be...
- Page 15 (Original instructions) ENGLISH Begin your cut again this time with less force. Allow the saw to Bucking cut at its own pace. Warning! Recommend that first time users should practice cutting on a saw horse. Operation Cutting a felled tree or log into lengths. How you should cut Base mode trimming / pruning depends on how the log is supported.
- Page 16 ENGLISH (Original instructions) C. Work gloves. For best results use a 4.5 mm file and a file holder or filing D. Strap. guide to sharpen your chain. This will ensure you always E. Chainsaw trousers. get the correct sharpening angles. F.
-
Page 17: Troubleshooting
(Original instructions) ENGLISH Pole mode, operate with the right hand on the main handle (2) There is no need to remove this nick as long as it does and the left hand on the Pole grip (18). not interfere with the movement of the blade. If it does interfere, remove the battery and use a fine toothed file or Switching on sharpening stone to remove the nick. -
Page 18: Maintenance
ENGLISH (Original instructions) Accessories Level of sound pressure according to EN 60745: Other attachments are available to convert your tools to a Sound pressure for Chainsaw (L ) 83 dB(A), uncertainty (K) 3 dB(A) Strimmer , or Blower. ® accoustic power for Chainsaw (L ) 94 dB(A), uncertainty (K) 1,9 dB(A) BCASST91B –... - Page 19 (Original instructions) ENGLISH For Chain saw, pole-pruner, Annex V Measured sound power level (LwA) 94 dB(A) Uncertainty (K) 1,9 dB(A) Guaranteed sound power (LwA) 96 dB(A) For more information, please contact Black & Decker at the following address or refer to the back of the manual. The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of Black &...
- Page 20 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place +64 9 259 1122 Mt Wellington Aukland 1060 United Kingdom &...