4.2
Drainpipe Layout
Secure the
drainpipe
properly.
4.3
Connecting the Humidifier Water Inlet Pipe
Connection method
G 3/4 inch reserved connector with outer screw thread
G 3/4 inch adapter with inner screw thread
Matched with the adapter, the pressure
resistance should be at least 0.7 MPa
Note 1:
1. When plastic materials such as PA66 are used, the recommended torque is 5 N· m.
2. When metal materials are used, the recommended torque is 10 N· m. A sealing washer must be
used when an union is used.
Note1
5