Table of Contents
Advertisement
Options during a call
Sending DTMF tones
You can send the DTMF (Dual Tone Multi-Frequency)
tones of the number on the display during a call.
This option is helpful for entering a password or
account number when you call an automated
system, like a banking service.
To send the DTMF tones:
1. When you are connected to the teleservice
system, press the Options soft key.
2. Press the Down key to highlight the Send DTMF
option.
3. Press the OK soft key.
4. Enter the number you want to send and press
the OK soft key.
The tones of the displayed number are sent.
Searching for a number in
phonebook
You can search for a number in Phonebook during a
call.
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook
option.
34
Options during a call
3. Press the OK soft key.
The Phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the
Phonebook entries will be listed, starting with
the first entry matching your input.
5. To view the highlighted entry, press the View
soft key.
For further details about the Phonebook feature,
see page 52.
Answering a second call
You can answer an incoming call while you have a
call in progress, if your network supports this
service and you have set the Call waiting menu
(Menu 7.3) to Activate; see page 120. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the Swap
soft key.
3. To end the call on hold, press the Options soft
key and select the End held call option.
To end the current call, press the
key.
35
Advertisement
Table of Contents
