Changing The Image Display Time - Canon SD1200 IS User Manual

Changing Shooting Functions

Changing the Image Display Time

You can change the length of time the images display directly after shooting.
Changing the Image Display Right After Shooting
You can change the image display that appears after shooting.
Displaying the Overlay
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for L size or postcard size prints.
112
Select [Review], then press the qr
●
buttons to select an option.
●
If you select [Off], the image will not
display.
●
If you select [Hold], the image displays
until you press the shutter button halfway.
Select [Review Info], then press the qr
●
buttons to select an option.
Detailed Displays detailed information (p. 43).
The area inside the AF frame is
Focus magnified, allowing you to check the
Check focus. The procedure is the same as
in "Checking the Focus" (p. 93).
[Disp. Overlay], then press the qr
●
buttons to select an option.
Grid Lines A grid overlays the display.
The areas outside the 3:2 range are
grayed out. This area will not print
3:2 Guide
when printing on paper with a 3:2
aspect ratio.
Both grid lines, and the 3:2 guide
Both
will display.