Table of Contents
Advertisement
10. Pick up the kettle by the handle and
pour the hot water into the desired
recipient (cups, teapot, etc.).
11. If no command is given within 60
seconds, the kettle will enter Stand-by
mode (all LEDs off). Pressing any key will
reactivate the kettle, placing it in
Temperature SELECTION mode, starting
from the last temperature set. Now
follow the operations from point 7
onwards in section "3 Use".
Danger of burns
• Wait a few seconds from when the
kettle boils, then pour the water out
slowly to prevent it spraying or coming
out too fast.
• Do not fill the kettle beyond the
maximum level (1.7 liters/7 cups) to
avoid the risk of burns when pouring.
• Do not tilt the hot kettle excessively – the
boiling water could spray out, with a risk
of burns.
• Keep your face at a safe distance from
the lid to avoid the risk of burns from
escaping steam.
16
Use
3.3 Keep Warm function
This function allows you to keep the water in
the kettle at the selected temperature for a
maximum of 20 minutes.
This function can be activated at any
moment during the heating cycle by
pressing the Keep Warm key (the
corresponding LED turns on to confirm the
selection). Pressing the key again exits then
Keep Warm function and the LED will turn
off. After 20 minutes have passed, the kettle
enters Stand-by mode.
Advertisement
Table of Contents
