Advertisement
appliances and power source connector.
■ Use the power source connector in accordance
with these instructions, taking into account
the working conditions and the work to be
performed. Use of the power source connector
for operations different from those intended could
result in a hazardous situation.
■ keep power source connector away from
other metal objects like paper clips, coins,
keys, nails, screws, or other small metal
objects that can make a connection from
one terminal to another. Shorting the terminals
together may cause burns or a fire.
bATTeRY USe AND cARe
■ power source connector is rated for 18 V Dc
only. Use only appropriate 18V battery packs.
Use of any other battery packs may create a risk
of injury and fire.
■ Recharge only with the 18 V li-Ion chargers.
A charger that is suitable for one type of battery
pack may create a risk of fire when used with
another battery pack.
■ To reduce the risk of electric shock, always
remove
battery
maintenance.
SeRVIce
■ Do not disassemble. Incorrect reassembly may
result in the risk of electric shock or fire. If it is
damaged, take it to a AEG service facility.
■ Store in a cool, dry place. Do not store where
temperatures may exceed 120°F (50°C) such
as in direct sunlight, a vehicle or metal building
during the summer.
■ Maintain
labels
carry important information. If unreadable or
missing, contact a AEG service facility for a free
replacement.
opeRATIoN
WARNING! Recharge only with the charger
specified for the battery. For specific charging
instructions, read the operator's manual supplied
with your charger and battery.
Inserting/Removing the battery
To insert the battery, slide the pack into the body
of the power source connector. Make sure it latches
securely into place.
To remove the battery, push in the release buttons
and pull the battery pack away from the power
source connector.
Using the bHJ18c power source connector with
AeG Heated Gear
The BHJ18C power source connector supplies
power to both the heated jacket and the power
pack
before
cleaning
and
nameplates.
source connector USB port. Insert the power cable
(from inside the battery pocket) into the power
cable port on the power source connector. Place
the power source connector into the pocket and zip
closed. If necessary, unzip the expansion zipper
to accommodate larger battery packs. When the
power source connector's On/Off switch is in the
ON position, the USB port is live and the jacket is
powered for use. Use the jacket's power button(s)
to control the settings. Move the power source
connector's On/Off switch to the OFF position to turn
off the USB port and jacket's power.
Using the USb port
The USB port can be used to charge a cell phone,
MP3 player, or other personal device that uses less
than 5V, 2.1A of DC electrical current.
Use the power source connector's On/Off switch to
control the USB port
Note: When used with AEG Heated Gear, the cord
can be run from the battery pocket, through the
grommet and channel on the interior of the jacket,
and through another.
MAINTeNANce
or
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact an AEG service facility for instructions.
Techtronic Industries (Australia) Pty. Ltd.
Level 1, 660 Doncaster Road,
Doncaster, VIC 3108,
Australia
Techtronic Industries N.Z. Limited
These
18-26 Amelia Earhart Avenue,
Mangere, Auckland 2022,
New Zealand
Advertisement
