To Transmit; Setting Dynamike; Setting Talkback - Cobra 29 LX MAX User Manual

Operation

To Transmit

NB/ANL
ANL
Caution!
S/RF
Be sure the antenna is properly
connected to the radio before
transmitting. Transmitting
VOL
without an antenna, or a
poorly matched antenna, could
cause damage to the transmitter.
OFF
Be sure to read the F.C.C. Rules
and Regulations included with
Select a desired channel.
this unit before transmitting. 1
Transmit
PUSH &
HOLD
2 Push and hold the PTT button to transmit.
When transmitting, hold the microphone two inches
from your mouth and speak in a clear, normal voice.
Release PTT button to receive.
14
AW-1210039-1B_29LX_MAX_MANL_REV_022021.indd 14-15 AW-1210039-1B_29LX_MAX_MANL_REV_022021.indd 14-15
1.5 2 3
CAL
SWR TX
RF
3 5 7 9
1
SIG +30dB
MEM WX !
SQ DYNAMIKE RF GAIN
MAX
MIN MAX MIN
2 3
1.5
NB/ANL CAL
SWR
ANL
S/RF
RF
SWR
CAL
3 5 7 9
1
SIG +30dB
VOL SQ DYNAMIKE
OFF MIN MAX
Setting Dynamike®
This controls the microphone sensitivity
1.5
NB/ANL
SWR
ANL
(outgoing audio level).
S/RF
RF
SCAN CH 9/19
SWR
CAL
1
SIG
SWR VOL SQ DYNAMIKE
DELTA TUNE T BACK
CAL
OFF
OFF MIN
3 Initially, set Dynamike fully clockwise so that
maximum voice volume is available. The Dynamike
may have to be reduced in some conditions.

Setting TalkBack

This control is used to adjust the desired amount of
modulation talk back present at the speaker during
transmit.
TX
At the fully counter-clockwise position the TalkBack
RX
is Off.
MEM WX !
RF GAIN DELTA TUNE T BACK
MIN MAX
2 3
CAL
TX
RX
3 5 7 9
+30dB
MEM WX !
RF GAIN
MAX MIN
SCAN CH 9/19
SWR
CAL
OFF
15
Operation
SCAN CH 9/19
SWR
DELTA TUNE T BACK
CAL
OFF
MAX
2/24/21 2:55 PM 2/24/21 2:55 PM