Service Menu; Shipping Init; Burning Mode - Sharp LC-32HI5012E Service Manual

How to Enter Factory Menu?
Press the RC buttons in this sequence: "Menu 1 1 4 7" to enter the factory menu.
Description:

5.1 SHIPPING INIT

5.2 BURNNG MODE
5.3 ADC ADJUST
5.4 PICTURE SETTING
5.5 SOUND SETTING
5.6 GENERAL SETTING
5.7 DEBUG
FACTORY SETTING
SHIPPING INIT: TV Initilization and all parameter
to be default. Designed for Shipment.
BURNING MODE: For test panel. If it's in
operation, use key board "power" to quit.
ADC ADJUST: Change ADC parameters
PICTURE SETTING: Change Picture Setting
SOUND SETTING: Change Sound Setting
GENERAL SETTING: Some other settings
usualy used, and also for Debug
DEBUG: Debug mode.
PANEL SETTING: Change panel parameters
EMC SETTING: Some settings may affect EMC
SW INFORMATION: Display some system information.
BOARD INIT: Initialize TV, restore to factory configuration.
SW UPGRADE: Software update item.
OAD SETTING
Board Type: Display board type
Build Time: Display Firmware build time
HDCP Check: HDCP key status
MAC Address: MAC Address
5.1 SHIPPING INIT
TV Initilization and all parameter to be default, Designed for Shipment.

5.2 Burning Mode

For test panel. If it's in operation, use key board "power" to quit.

5. SERVICE MENU

MSD6486 Factory Menu Specification
5.8 PANEL SETTING
5.9 EMC SETTING
5.10 SW INFORMATION
5.11 BOARD INIT
5.12 SW UPGRADE
5.13 OTA SETTING
47
Picture 1 Factory setting