Canon XF100 Instruction Manual page 92

Special Recording Modes
NOTES
• You can use only one special recording mode at a time.
• Pre-recording mode will be deactivated if the special recording mode is changed or turned off. It will be
92
deactivated also if you change the video configuration.
• During pre-recording mode, the time code will be recorded with the running mode (0 70) set to [Free Run],
regardless of the previous setting. Alternatively, you can use an external time code signal (b only). When
the time code is recorded, it will include the 3 seconds before the START/STOP button was pressed. When
special recording mode is deactivated, the running mode will return to its previous setting.