Using The Face Self-Timer - Canon PowerShot SX210 IS User Manual

Using the Face Self-Timer

• Shutting both eyes will also be detected as a wink.
• If a wink is not detected, the shutter will release approximately 15
seconds later.
• If there are no people in the shot when the shutter button is pressed fully,
the camera will shoot after a person enters the shot and winks.
Using the Face Self-Timer
To take a photo that includes the photographer, such a group photo, compose
the shot, and press the shutter button. The camera will shoot two seconds
after you enter the shot and it detects your face (p. 82).
62
Choose .
∆
Follow Steps 1 – 2 on p. 55 to choose
then press the l button.
∆ Press the qr buttons or turn the  dial to
, then press the l button.
choose
Compose the shot and press the
shutter button halfway.
∆
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
The lamp will blink and the self-timer sound
will play.
,