18
ASSEMBLING AND PREPARING
CAUTION
When attaching the stand to the TV
y
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
Make sure that the screws are fastened
y
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.
NOTE
Remove the stand before installing the
y
TV on a wall mount by performing the
stand attachment in reverse.
The Rubber will protect the opening
y
from accumulating dust and dirt. When
installing the wall mounting bracket, use
the Rubber. (Only LY751*, LY761*)
Mounting on a table
1
Lift and tilt the TV into its upright position on
a table.
2
Connect the power cord to a wall outlet.
y
Rubber
2EA
- Leave a 10 cm (minimum) space from
the wall for proper ventilation.
10 cm
CAUTION
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.