Connecting The Power Amplifier And Subwoofers; Connecting A Power Amplifier - Yamaha AVENTAGE CX-A6200 Owner's Manual

2

Connecting the power amplifier and subwoofers

Connect the power amplifier and subwoofer (with built-in amplifier) to the unit.

Connecting a power amplifier

Connect the input jacks of your power amplifier to the PRE OUT jacks of the unit so that the
audio source selected on the unit can be output to the power amplifier for playback.
Select a balanced (XLR) or an unbalanced (RCA) connection for each channel depending on the
input jacks available on your power amplifier.
X
The XLR jacks and RCA jacks for each channel output the same signals.
Caution
To prevent the generation of loud noises or abnormal sounds, make sure you remove the power cable
of the unit and turn off the power amplifier before making connections.
■ Balanced connection
Depending on the speaker system you want to use, connect the corresponding PRE OUT (XLR)
jacks of the unit to the amplifier with XLR balanced cables.
Y
• Before connecting XLR balanced cables, refer to the instruction manual of your power amplifier and verify that
its XLR jacks are compatible with the pin assignments of the unit (p.29).
• We recommend using a power amplifier with volume control bypass (or without volume control circuit).
2
SURROUND (REAR)
ZONE 2 ZONE 3 FRONT SURROUND
COAXIAL 4 COAXIAL 5 COAXIAL 6 OPTICAL BACK SUBWOOFER
ANTENNA
FM AM (2 RADIO)
75
REAR FRONT SURROUND
L R R R R SURROUND R FRONT
PRESENCE PRESENCE BACK
PRE OUT
(XLR) jacks
(Female connector)
(Male connector)
30
En
SUBWOOFER
2 1
R (REAR) L (FRONT)
FRONT REAR
CENTER
PRESENCE PRESENCE
PRE OUT
SURROUND FRONT REAR
CENTER L FRONT L SURROUND L L L
BACK PRESENCE PRESENCE
Power amplifier
Speaker
connections
XLR
Main input (XLR)
The unit (rear)