Replacing The Tail/Brake Light Bulb - Yamaha VINO XC50X Owner's Manual

Tail/brake light bulb, replacing<IXE>
Thoroughly clean off any dirt and fin-
gerprints on the headlight bulb us-
ing a cloth moistened with alcohol
or thinner.
5. Install the headlight bulb cover, and
then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
2
1
ZAUM00**
1. Tail/brake light lens
2. Bulb
2. Remove the defective bulb by push-
ing it in and turning it counterclock-
wise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
cC
Do not overtighten the screws, other-
6-23
EAU24131 wise the lens may break.
ECA10680
1
2
3
4
5
6
7
8
9