Troubleshooting - Canon DVD CAMCORDER DC410 Instruction Manual

Trouble?

Troubleshooting

If you have a problem with your camcorder, refer to this section. Sometimes what you
think is a malfunction of the camcorder may have the simplest of solutions - please
read the "CHECK THIS FIRST" box before going on to the more detailed problems
and solutions. Consult your dealer or a Canon Service Center if the problem persists.
CHECK THIS FIRST
Power supply
Is the battery charged? Is the compact power adapter correctly connected to the
camcorder? ( 18)
Recording
Did you turn the camcorder on and set and set it to
Is the CAMERA indicator lit up in green? Was the disc or memory card correctly inserted
into the camcorder? (
Playback
Did you turn the camcorder on and set and set it to
PLAY indicator on? Was the disc or memory card correctly inserted into the camcorder?
( 25, 27) Does it contain any recordings?
Power Source
The camcorder will not turn on or it turns
off by itself.
- The battery pack is exhausted. Replace or
charge the battery pack (
- Remove the battery pack and reattach it
correctly.
Cannot charge the battery pack.
- Charge the battery pack in temperatures
between 0 °C and 40 °C (32 °F and
104 °F).
- The battery pack is too hot. Charging will
start once the battery pack temperature is
below 40 °C (104 °F).
- The battery pack is damaged. Use a
different battery pack.
After using the camcorder for a long time,
it becomes hot.
- This is not a malfunction. Turn off the
camcorder and let it cool down before
resuming use.
25, 27)
18).
or
or
Recording
Pressing Start/Stop will not start recording.
- Use a disc whose performance has been
tested with this camcorder (
- The disc is full ("
screen). Delete some recordings (DVD-RW
in VR mode) to free some space (
replace the disc.
- Unfinalize ( 49) the disc (DVD-RW in
VIDEO mode).
- The camcorder has exceeded its
operational temperature. Turn off the
camcorder and let it cool down before
resuming use.
The point where Start/Stop
does not match the beginning/end of the
recording.
- There is a slight interval between pressing
and the actual start of recording.
Start/Stop
This is not a malfunction.
Additional Information
mode?
mode? Is the
7).
END" appears on the
35) or
was pressed
• 73