Display Mode
Turning the monitor on
1. Correctly insert the power cord into the monitor and into the power socket.
2. Press the power button on the bottom of monitor or front control panel.
Turning the monitor off
With the power on, press the power button on the remote or control keypad to place
the monitor backside in a standby mode. To turn off power completely, disconnect the
AC power cord or turn power switch off.
Selecting the input source
1. Using the remote, press SOURCE on the monitor backside keypad and toggle the
source button until you have reached the desired source, and press ENTER (VGA,
OPS, HDMI 2, HDMI 1, DP)
2. If the monitor cannot find a source, a "No signal" message will be appeared.
12