Table of Contents
Advertisement
Errors
Vibrations and movement of
the appliance whilst spin-
ning.
Heavy foam build-up
Drum does not turn, water
does not flow in.
Noise
Errors
Rushing, hissing noise.
Banging noises, rattling in
the drain pump.
Loud noises during the spin
cycle.
Slurping, rhythmical suction
noise.
Cause
The appliance feet are not
fixed.
Transit bolts have not been
removed.
Detergent dosage is too
high.
Load detection is active.
Cause
Water is flushed under pres-
sure into the detergent
drawer.
Foreign bodies have got into
the drain pump.
Appliance is not correctly
aligned.
The appliance feet are not
fixed.
Transit bolts have not been
removed.
The drain pump is active, the
detergent solution is
pumped out.
Troubleshooting en
Troubleshooting
Secure the appliance feet.
▶
→ "Aligning the appliance",
Page 15
→ "Removing the transit bolts",
▶
Page 13
Immediate measure: Mix one table-
▶
spoon of fabric softener with 0.5
litres of water and pour the mixture
into the left-hand compartment (not
for outdoor clothing, sportswear or
items stuffed with down).
Reduce the amount of detergent for
▶
the next washing cycle with the
same load.
Not a fault – no action required.
▶
Note: The load detection can take up
to two minutes.
Troubleshooting
Not a fault – normal operating
▶
noise.
→ "Cleaning the drain pump",
▶
Page 35
→ "Aligning the appliance",
▶
Page 15
Secure the appliance feet.
▶
→ "Aligning the appliance",
Page 15
→ "Removing the transit bolts",
▶
Page 13
Not a fault – normal operating
▶
noise.
45
Advertisement
Table of Contents
