Advertisement
Quick Links
Assembly & User Manual
V2.5 Updated: 05/18/2021
Patent: US 7,971,596 B2
!
WARNINGS
Coverlet safety sheet must be used at
Always follow assembly instructions
all times to prevent entrapment
Only use the recommended size
Maximum weight (occupant) : single
mattress: see technical specs
450lb/204kg
+1 724-967-5337 | customercare@safetysleeper.com | safetysleeper.com
Advertisement
Related Manuals for Abram's Nation the safety sleeper
Summary of Contents for Abram's Nation the safety sleeper
- Page 1 Assembly & User Manual V2.5 Updated: 05/18/2021 Patent: US 7,971,596 B2 WARNINGS Coverlet safety sheet must be used at Always follow assembly instructions all times to prevent entrapment Only use the recommended size Maximum weight (occupant) : single mattress: see technical specs 450lb/204kg +1 724-967-5337 | customercare@safetysleeper.com | safetysleeper.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1.......... Washing and Handling Instructions 2................... Disclaimer 3................... Disclaimer 4............... Technical Specifications 5..............Technical Specifications 6............Assemble Twin/Single Frame 7............Assemble Twin/Single Frame 8........Assemble Full/Double/Queen Frame 9........Assemble Full/Double/Queen Frame 10..........Attaching Enclosure to Frame 11........... Attaching Enclosure to Frame 12.............. -
Page 3: Washing And Handling Instructions
Use laundry detergent Do not use fabric softener Do not dry clean Do not bleach DRYING INSTRUCTIONS Tumble dry The Safety Sleeper® on low heat, or line dry. Dry on low heat Line dry Dry on gentle Do not iron Find The Safety Sleeper®... - Page 4 DISCLAIMER RECOMMENDED USE For proper use, care and assembly, all instructions must be specifically adhered to. Wash before first use of this product. Bed is not intended for use as a toy, play equipment or as a disciplinary device. Recommended for ages 3 and up. ENTRAPMENT HAZARD Pillows, blankets, and stuffed animals to be used at caregiver’s discretion.
- Page 5 • Ensure your in-home mattress (when applicable) meets safety guidelines (https://sleepproducts.org/advocacy/federal-mattress- regulations/). IMPROPER USE • Do not use the The Safety Sleeper® if any parts are missing or broken. Contact Abram’s Nation for replacement parts and instructional literature if needed. • Do not substitute parts.
-
Page 6: Technical Specifications
TECHNICAL SPECIFICATIONS EXTERIOR OVERALL DIMENSIONS Size Length Width Height US Twin 189.23cm/74.5” 107.32cm/42.25” 105.41cm/41.5” US Twin XL 201.93cm/79.5” 112.40cm/44.25” 105.41cm/41.5” EU Single 200cm/78.75” 97.8cm/38.5” 107.25cm/42.23” AU Single 188cm/74” 107.25cm/42.23” 99.7cm/39.25” UK Single 189.2cm/74.5” 97.8cm/38.5” 107.25cm/42.23” US Full 189.23cm/74.5” 107.32cm/42.25” 143.51cm/56.5” EU Double 200cm/78.75”... - Page 7 TECHNICAL SPECIFICATIONS OPERATING CONDITIONS The Safety Sleeper® is designed for normal indoor conditions. MATERIALS Fabric & Mesh:100% Polyester Material Flame Resistant Bias Binding: 50% Cotton/50% Polyester Webbing: 100% Polypropylene YKK Zippers FRAME Aluminum Nylon Stainless Steel WEIGHT Shipping: Total product weight with suitcase: under 50lbs/23kg...
-
Page 8: Assemble Twin/Single Frame
ASSEMBLE TWIN/SINGLE FRAME Assembly videos also available at: safetysleeper.com/pages/assembly STEP 1: Lay all six pieces labeled B1, B2, B3, B4, B5, B6 on the ground with labels facing up. STEP 2: Connect B1 to B1, B2 to B2, and B3 to B3 in numerical order by pushing in button &... - Page 9 ASSEMBLE TWIN/SINGLE FRAME STEP 4: Lay out four top frame pieces labeled T1, T2, T3, then connect by pushing in button and sliding together until button clicks into place. STEP 5: Repeat for second top support using pieces with T4, T5, T6. STEP 6: Hold the T1-T3 vertically and line it up with the B2-B3 base piece making sure support pieces are facing towards the center of the frame and match the correct jaw slide (S1 to S1, S2 to S2).
-
Page 10: Assemble Full/Double/Queen Frame
ASSEMBLE FULL/DOUBLE/QUEEN FRAME STEP 1: Lay all eight pieces labeled B1, B2, B3, B4, B5, B6, B7, B8 on the ground with labels facing up. STEP 2: Connect B1 to B1, B2 to B2, B3 to B3 and B4 to B4 in numerical order by pushing in button &... - Page 11 ASSEMBLE FULL/DOUBLE/QUEEN FRAME STEP 1: Lay out five top frame pieces labeled T1, T2, T3, T4 then connect by pushing in button and sliding together until button clicks into place. STEP 2: Repeat for second top support using pieces with T5, T6, T7, T8 STEP 3: Hold the T1-T4 vertically and line it up with the B3-B4 base piece making sure support pieces are facing towards the center of...
- Page 12 ATTACHING TO FRAME Zipper STEP 1: Attach the frame pad covers so they cover the push pins. Zipper goes on vertical bar. TIP: Ensure pin is fully engaged into the box before zipping. *Frame pads can be installed before or after inserting the mattress.* +1 724-967-5337 | customercare@safetysleeper.com | safetysleeper.com...
- Page 13 ATTACHING TO FRAME STEP 2: Lay enclosure with roof zippers facing up, on the inside base of the frame. STEP 3: Attach the enclosure to the base frame at the head and foot, or B1 and B4 (Twin/Single) or B1/B2 and B5/B6 (Full/Queen/ Double).
-
Page 14: Inserting The Mattress
For daily home use a standard 8” waterproof memory foam mattress is provided (US & Can). Any 8-10” standard mattress can be used inside of The Safety Sleeper. Air mattress is for travel use only. STEP 1: Unzip one or both of the mattress pockets on either end of the enclosure. - Page 15 ADDING AND REMOVING THE COVERLET SAFETY SHEET The Safety Sleeper® utilizes a coverlet safety sheet design that creates a completely enclosed pocket for the mattress. The coverlet safety sheet can easily be removed and laundered (for more, see the “Washing and Care Instructions”).
-
Page 16: Suitcase Packing
SUITCASE PACKING The Safety Sleeper® is designed for travel and daily use. Below is our recommended method for packing the suitcase. 1. Lay triangular frame pads on left side. 2. Place folded enclosure over the frame pads. 3. Pack right angle pieces from base frame. -
Page 17: Air Mattress
AIR MATTRESS Air mattress is intended for travel use only. The following safety tips are provided by the air mattress’s manufacturer. Air Mattress Safety Tips 1. Stretching is a natural characteristic of new vinyl. During initial use, your airbed may become soft and require additional inflation to maintain desired firmness. - Page 18 REGULATIONS AND TESTING COMPLIANCE The Safety Sleeper uses medical grade flame retardant fabrics and is subject to and compliant with the following regulations. • FDA Registered Medical Device • Operator: 10049434 • Registration: 3011389091 • Listing: D234571 • Regulation (EU) 2017/745 •...
- Page 19 Information for your records Serial # _______________________________________________ Date you received your bed ______________________________ Purchased by (DME/Non-profit) ____________________________ Staple your receipt to this manual for easy reference Find The Safety Sleeper® warranty activation at: safetysleeper.com/pages/warranty- activation Or scan the QR Code.
- Page 20 4726 Highpoint Drive Gibsonia, PA 15044 +1 724-967-5337 | customercare@safetysleeper.com | safetysleeper.com...