Wall-Mounted Installation - Huawei SUN2000-75KTL Series User Manual

SUN2000-(75KTL, 100KTL, 110KTL, 125KTL) Series
User Manual

4.4.2 Wall-mounted Installation

Prerequisites
You have prepared expansion bolts. M12x60 stainless steel expansion bolts are
recommended.
Procedure
Step 1 Determine the positions for drilling holes using the mounting bracket. Level the
positions of mounting holes using a bubble or digital level, and mark the positions
with a marker.
Step 2 Drill holes using a hammer drill and install expansion bolts.
Avoid drilling holes in the position of the wall with water pipes and power cables
buried inside.
● To prevent dust inhalation or contact with eyes, wear safety goggles and an
● Clean up any dust in and around the holes using a vacuum cleaner and
● Level the head of the expansion sleeve with the concrete wall after removing
Step 3 Secure the mounting bracket.
Issue 11 (2021-11-10)
WARNING
NO TICE
anti-dust respirator when drilling holes.
measure the distance between holes. If the holes are inaccurately positioned,
drill a new set of holes.
the bolt, spring washer, and flat washer. Otherwise, the mounting bracket will
not be securely installed on the wall.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
32