Troubleshooting - Panasonic EW‑DP52 Operating Instructions Manual

Troubleshooting

Problem
The charge status lamp
( ) does not glow when
charging starts.
The charge status lamp
( ) is blinking rapidly.
(Twice every second)
Possible cause
You have just purchased the
toothbrush or have not used it for
a while.
The main unit is not properly
mounted on the charging stand.
The temperature is too low or
high while charging.
Action
The charge status lamp (
glow for several minutes after starting to
charge it, but it will glow if you continue to
charge it. If the charge status lamp (
does not glow after a while, consult with
an authorized service center for repair.
Insert the main unit in the charging ring
and check that the charge status lamp
( ) glows. (See page 11.)
Charge the toothbrush within the
recommended charging temperature of
5 °C to 35 °C.
If the charge status lamp (
when charging within the recommended
temperature range, please contact an
authorized service center for repair.
) may not
)
) blinks even
19