Linksys BEFCMUH4 Quick Manual page 27

to Basic => Security page.
B. Enter a different password in the Password field, and enter the same
password in the second field to confirm the password.
C. Click the Apply button.
9. I am a PPPoE user, and I need to remove the proxy settings or the
dial-up pop-up window.
If you have proxy settings, you need to disable these on your computer.
Because the Gateway is the gateway for the Internet connection, the computer
does not need any proxy settings to gain access. Please follow these
directions to verify that you do not have any proxy settings and that the
browser you use is set to connect directly to the LAN.
For Microsoft Internet Explorer 5.0 or higher:
A. Click Start, Settings, and Control Panel. Double-click Internet Options.
B. Click the Connections tab.
C. Click the LAN settings button and remove anything that is checked.
D. Click the OK button to go back to the previous screen.
E. Click the option Never dial a connection. This will remove any dial-up
pop-ups for PPPoE users.
For Netscape 4.7 or higher:
A. Start Netscape Navigator, and click Edit, Preferences, Advanced, and
Proxies.
B. Make sure you have Direct connection to the Internet selected on this
screen.
C. Close all the windows to finish.
10. To start over, I need to set the Gateway to factory default.
Hold the Reset button for up to 5 seconds and then release it. This will return
the password, forwarding, and other settings on the Gateway to the factory
default settings. In other words, the Gateway will revert to its original factory
configuration.
11. I need to use port triggering.
Port triggering looks at the outgoing port services used and will trigger the
Gateway to open a specific port, depending on which port an Internet
application uses. Follow these steps:
26
Linksys BEFCMUH4 Cable Gatewayr + 802.11b Wireless-Ready