Table of Contents
Advertisement
Field specification setting mode of wired remote controller
Use of field specification setting mode
Data
1. If you want to use the field specification setting mode for your wired remote controller, press the Set and [∧]
buttons at the same time for more than 3 seconds.
2. Refer to the list of field specification for your wired remote controller on the next page, and select the desired menu.
f Using the [∧]/[∨] buttons, select a main menu number and press the [＞] button to enter the sub-menu setting
screen.
f Using the [∧]/[∨] buttons, select a sub-menu number and press the [＞] button to enter data setting screen.
f When you enter the setting stage, the current setting value will be displayed.
f Refer to the chart for data settings.
f Using the [∧]/[∨] buttons, change the setting value. Press the [∨] button to move to the next setting value.
f Press the Set button to save the setting value and exit to the sub-menu setting screen.
f Press the ESC button to exit to normal mode.
• While configuring the setting, press the ESC button to exit to the sub-menu setting screen without saving your
changes.
NOTE
• When you don't enter any buttons for more than 3 minutes, you will be back to normal mode.
20
DVM Hydro Unit_MWR-WW00_IM_EN_03647A(1).indd 20
Main menu Sub-menu
2013-01-09 오후 2:48:44
Advertisement
Table of Contents
