Advertisement
Quick Links
User manual for WIBT40A (for TV)
1. Introduction
WIBT40A is compliant with IEEE802.15.1. The core chipset is BCM20705 from Broadcom.
2. Hardware Architecture:
2.1 Main Chipset Information
Item
MAC/BBP/Radio Transceiver/PA
2.2 Circuit Block Diagram
The major internal components and external interfaces of WIBT40A are illustrated in Figure 1-1.
Figure 1-1 WIBT40A Major Components and System Interface
3. Feature
WIBT40A is the 802.15.1 RF Device, that acts as a wireless terminal equipment, which can
communicate with a host device.
Version 1.0
Vendor
Broadcom
Samsung Electronics
Part Number
BCM20705
page 1 of 8
Advertisement
Summary of Contents for Samsung WIBT40A
- Page 1 The major internal components and external interfaces of WIBT40A are illustrated in Figure 1-1. Figure 1-1 WIBT40A Major Components and System Interface 3. Feature WIBT40A is the 802.15.1 RF Device, that acts as a wireless terminal equipment, which can communicate with a host device. Version 1.0...
- Page 2 • Packet Boundary flag (PBF) - Integrated RF section • Single-ended, 50 ohm RF interface • Buit-in TX/RX switch functionality • TX class 1 output power capability • -88 dBm RX sensitivity basic rate Version 1.0 Samsung Electronics page 2 of 8...
- Page 3 Figure 3-1 Receiver RF Specifications (bcm20705) Version 1.0 Samsung Electronics page 3 of 8...
- Page 4 Figure 3-2 Receiver RF Specifications (WIBT40A) Version 1.0 Samsung Electronics page 4 of 8...
- Page 5 Figure 3-3 Transmitter RF Specifications(bcm20705) Version 1.0 Samsung Electronics page 5 of 8...
- Page 6 4. PIN description 5. Installation This radio module must be installed in a device and not allow the user to replace nor modify it. And the location of installation is as follows Figure 5-1. Version 1.0 Samsung Electronics page 6 of 8...
- Page 7 FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this Version 1.0 Samsung Electronics page 7 of 8...
-
Page 8: Label Of The End Product
Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains IC : 649E-WIBT40A ". Version 1.0 Samsung Electronics...