Black & Decker BDXPA0010 Instruction Manual page 5

Outdoor Wireless Remote Control Outlets
Remote Battery Replacement:
If operation of the receiver unit becomes erratic, it may be necessary to replace the battery
in the hand-held remote unit. To do this, first remove the battery compartment cover. Press
the tray release button on the back of the remote. Next, remove the depleted battery and
discard according to local ordinances. Be sure to correctly install the new battery. Replace
battery compartment cover and test by using it to control the outdoor remote control outlet.
CAUTION:
1. Appliances to be connected to the remote control socket MUST NOT exceed the voltage
and current ratings as in "Specifications".
2. Operation is subject to the following two conditions:
(1) this appliance may not cause harmful interference, (2) this appliance must accept any
interference received, including interference that may cause undesired operation.
3. For both outdoor and indoor use but store indoors when not in use.
4. Low transmitter battery may lower the distance between the transmitter and the receiver.
5