CITROEN GRAND C4 PICASSO 2009-2010 Manual page 193

Removing a wheel
 Park the vehicle on level, stable
and non-slippery ground. Apply
the parking brake (a message
and a warning lamp appear on
the instrument panel).
Switch off the ignition and engage
fi rst gear or reverse gear depend-
ing on the slope (position P if an
automatic gearbox, D or R if a
6-speed electronic gearbox).
 Use a chock to secure the vehi-
cle more safely. Place the chock
9 in front of the wheel that is op-
posite the wheel affected.
XI
Before any operation of this
sort, it is advisable to deac-
tivate your pneumatic sus-
pension.
172
P R A C T I C A L I N F O R M A T I O N
 Detach the trim using the remov-
ing tool 4 , pulling in the area of
the valve.
For vehicles with alloy wheels,
insert the trim removing tool 1
into the recess in the central trim
and lever it off.
For vehicles with alloy wheels
that have visible bolts, remove
the chrome covers using the re-
moving tool 2 .
 Slacken the wheel bolts. For ve-
 Position the jack under the vehi-
 Unwind the jack 5 until its brack-
 Continue to extend the jack so
 Undo the wheel bolts and remove
Copyright CITROEN compiled by C4owners.org
hicles with alloy wheels, undo
the security bolts using the secu-
rity socket 6 .
cle, at the jacking point A closest
to the wheel to be changed.
et is in contact with the ground.
Make sure that the jack is verti-
cal under the jacking point used.
as to raise the vehicle.
the wheel.