NEC CHIEF K3F220 Installation Manual page 14

2. Place a spacer on the top of the lower left monitor
3. Carefully lower the upper left monitor
4. After the upper monitor height is in the desired
position, tighten the hex screws to fix the arm in
place
Ⓔ
5. Loosen the knob
left monitor
6. Move the upper left monitor towards the center pole
so that the edge lines up with the lower left monitor
Ⓔ
7. Tighten the knob
horizontal position
on the back of the arm for the
on the back of the arm to fix the
2 x 2 mUlti-monitoR installation (K3F220/K3g220) | 14
Ⓔ
CHIEF STAND INSTALLATION MANUAL | USER'S GUIDE