Preliminary Preparation; What To Do For Energy Saving; First Use - Beko BUFR2715PSIM User Manual

Preliminary preparation

4
4.1. What to do for
energy saving
Connecting the product to
electronic energy-saving
A
systems is harmful, as it may
damage the product.
For a freestanding appliance; 'this
refrigerating appliance is not intended
to be used as a built-in appliance.
Do not keep the freezer doors open for
long periods.
Do not place hot food or beverages
into the freezer.
Do not overfill the freezer; blocking
the internal air flow will reduce cooling
capacity.
Food packages should not be in direct
contact with the heat sensor located
in the freezer compartment. The food
should be 10 cm away from the sensor.
In case of contact with the sensor,
energy consumption of the device may
increase.
10 cm
Refrigerator / User Manual

4.2. First Use

Before using your refrigerator, make sure
the necessary preparations are made
in line with the instructions in "Safety
and environment instructions" and
"Installation" sections.
Keep the product running without
placing any food inside for 6 hours
and do not open the door, unless
absolutely necessary.
The temperature change caused by
opening and closing of the door while
using the product may normally lead to
frost deposit, icing and condensation
on food placed on door/body shelves
and glass containers placed in the
product.
C
A sound will be heard when
the compressor is engaged.
It is normal to hear sound
even when the compressor
is inactive, due to the
compressed liquids and gasses
in the cooling system.
C
It is normal for the front edges
of the refrigerator to be warm.
These areas are designed to
warm up in order to prevent
condensation.
C
For some models, indicator
panel turns off automatically 1
minutes after the door closes.
It will be reactivated when the
door is open or any button is
pressed.
13/26 EN