Engaging The Rotor Blades; Disengaging The Rotor Blades; Shutting Off The Engine; Adjusting The Discharge Chute And Chute Deflector - Toro Power Clear 721 R-C Operator's Manual

Engaging the Rotor Blades

To engage the rotor blades, hold the control bar
against the handle (Figure
Figure 13
Disengaging the Rotor
Blades
To disengage the rotor blades, release the control bar
(Figure 14).
Figure 14
13).

Shutting Off the Engine

To shut off the engine, remove the key from the
ignition.
Adjusting the Discharge
Chute and Chute Deflector
To raise or lower the angle of the chute deflector,
press the trigger on the chute deflector and move the
chute deflector up or down.
To adjust the discharge chute, move the chute handle.
g216251
1. Chute handle
g006457
12
Figure 15
2. Trigger
g278630