Table of Contents
Advertisement
Option
Description
•
MEBx Hotkey
This option specifies whether the MEBx Hotkey function should be enabled when the system boots.
Enable MEBx Hotkey - enabled by default.
Virtualization support screen options
Option
Description
Virtualization
Allows you to enable or disable the Intel Virtualization Technology.
Enable Intel Virtualization Technology (default).
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided
by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
Trusted Execution
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional hardware
capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization Technology, and Virtualization
technology for direct I/O must be enabled to use this feature.
Trusted Execution - disabled by default.
Wireless screen options
Option
Description
Wireless Device
Allows you to enable or disable the internal wireless devices.
Enable
•
•
All the options are enabled by default.
Maintenance screen options
Option
Description
Service Tag
Displays the Service Tag of your computer.
Asset Tag
Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
SERR Messages
This field controls the SERR message mechanism. Some graphic card required the SERR message.
•
BIOS Downgrade
This field controls flashing of the system firmware to pervious revisions.
Allows BIOS Downgrade (Enabled by default)
Data Wipe
This field enables user to erase data from all internal storage device.
BIOS Recovery
Allows you to recover from certain corrupted BIOS conditions from a recover file on the user primary hard drive or
an external USB key. Enabled by default.
38
System setup
Enable USB Provision
WLAN/WiGig
Bluetooth
Enable SERR Messages (default)
Advertisement
Table of Contents
