Connecting The Speakers; Connection Diagram - Yamaha NS-PA41 Owner's Manual

Caution
Make sure the power cables for the subwoofer and your other AV components are disconnected from the AC wall
outlets before making any connections.

Connection diagram

Surround speakers
Right
Subwoofer cable
(Included)
Subwoofer
To AC wall outlet
■ Preparing the speaker cables
Once you've positioned the speakers, you'll need to cut
the 24.5-meter (80 ft.) speaker cable to make five
cables for connecting the two front speakers, center
speaker, and the two surround speakers.
1
Cut the included speaker cable to suitable
lengths for the front, center, and surround
speakers. You need five cables.
2
Remove about 10 mm (3/8") of insulation from
the end of each speaker cable.
5
En

Connecting the speakers

Center speaker
Left
SURROUND CENTER
SUBWOOFER
Amplifier
SURROUND
SUBWOOFER
Note: The exact layout of the
speaker terminals depends on
your amplifier.
SPEAKERS
FRONT
Right
SPEAKERS
FRONT
CENTER
3
Twist the bare wires tightly.
10 mm (3/8")
Good
Note
• Make the speaker cables as short as possible. Do not
bundle or roll up excess cable.
• Be careful not to trip on the speaker cable.
Otherwise, the speaker may tip over, possibly
resulting in personal injury.
• Twist the bare wires tightly so the individual strands
are not splayed.
• Be careful not to injure yourself while preparing the
speaker cables.
Front speakers
Left
No Good