Side Stand - Honda NSS250 2007 Owner's Manual

Side Stand

Refer to Saf ety Precautions
LEFT SIDE
(1)
(1) side stand spring
Check that the side stand assembly is
working properly. If the side stand is
stiff or squeaky, clean the pivot area
and lubricate the pivot bolt with clean
grease.
136
Servicing Your Honda
on page 72 . Check the spring ( ) for damage or loss
1
of tension.
Check the side stand ignition cut-off
system:
1. Sit astride the scooter.
2. Raise the side stand.
3. Pull the rear brake lever in.
4. Start the engine.
5. Lower the side stand all the way.
The engine should stop as you lower the
side stand. If the engine doesn't stop,
see your Honda dealer for service.