Repeater Mode; Entering The Repeater Mode; Setting Monitor Option; Encryption In The Repeater Mode - Motorola MTP830 S Feature User Manual

Repeater Mode

The Repeater Mode provides repeater connectivity between radios operating in the DMO Mode.

Figure 3: Repeater Mode Operation

DMO
A DMO repeater is used to extend the DMO range by retransmitting received information from one radio to another.
It retransmits group calls, private calls and data on a given frequency.
The repeater sends presence signal periodically on a free channel to allow other radios to synchronize on a given
frequency.
Only the radios on the same talkgroup can communicate with each other through the repeater.
Note: This is a selling feature.

Entering the Repeater Mode

To enter Repeater Mode, use one of the following ways:
• From the home screen, select Optns → Repeater Mode.
• From the home screen, press MENU key. Select More . . . → Networks → Repeater Mode.

Setting Monitor Option

Procedure:
1 From the home screen, press Optns.
2 Press Monitor.
3 Select one of the following:
• Off — Your radio works as a repeater only, no operation is available.
• Receive Only — Allows you to listen.
• Receive&Transmit — Allows you to listen and transmit by pressing PTT.

Encryption in the Repeater Mode

While in the Repeater Mode, the radio supports Air Encryption and is able to repeat encrypted calls and messages.
DMO
Modes | 51
| | Send Feedback