Advertisement

When transporting this unit, be sure to use the unit's packing materials and box so as to protect
it against any damage, in particular, dents in the front grille during transportation.
本機を輸送する場合、輸送時の破損 (特に、フロントグリルのへこみ) 等を防ぐために必ず専用の梱
包箱を使用してください。
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING:
IMPORTANT:
I CONTENTS
TO SERVICE PERSONNEL .......................................... 2
FRONT PANEL .............................................................. 3
REAR PANELS .............................................................. 3
REMOTE CONTROL PANELS ...................................... 4
SPECIFICATIONS / 参考仕様 ........................................ 5
INTERNAL VIEW ........................................................... 5
SET MENU TABLE ........................................................ 6
UPDATING FIRMWARE /
ファームウェアの書き込み ..................................... 14~24
1 0 0 9 6 7
DIGITAL SOUND PROJECTOR
YSP-1000
Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
2005
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
SERVICE MANUAL
IMPORTANT NOTICE
自己診断機能(ダイアグ) ..................................... 25~42
DISPLAY DATA ........................................................... 43
IC DATA ................................................................. 44~45
BLOCK DIAGRAM ................................................. 46~47
PRINTED CIRCUIT BOARD .................................. 48~58
PIN CONNECTION DIAGRAM .................................... 59
SCHEMATIC DIAGRAM ........................................ 61~68
PARTS LIST ........................................................... 69~90
REMOTE CONTROL .................................................... 91
All rights reserved.
P.O.Box 1, Hamamatsu, Japan
'05.10

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha YSP-1000

  • Page 1: Table Of Contents

    This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
  • Page 2: To Service Personnel

    YSP-1000 I TO SERVICE PERSONNEL AC LEAKAGE WALL EQUIPMENT TESTER OR 1. Critical Components Information OUTLET UNDER TEST EQUIVALENT Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only)
  • Page 3: Front Panel

    YSP-1000 I FRONT PANEL J model I REAR PANELS U, C, T, K, A, B, G, L, V models IR OUT OPTIMIZER MIC (YAPO) J model BOTTOM VIEW U, C models T model K model A model B, G models...
  • Page 4: Remote Control Panels

    YSP-1000 I REMOTE CONTROL PANELS RRC4001-2603EM RRC4001-2601EM RRC4001-2602EM (U model) (C, T, K, A, B, G, L, V models) (J model) WF75640 WF72990 WF72980 電  源  電  源  電  源  STANDBY/ON POWER STANDBY/ON POWER POWER POWER ビデオ チューナー テレビ テレビ 入力1 入力2 マクロ...
  • Page 5: Specifications / 参考仕様

    YSP-1000 I SPECIFICATIONS / 参考仕様 I Amplifier Section / アンプ部 • DIMENSIONS / 寸法図 Maximum Power / 実用最大出力 (EIAJ) Dimensions / 寸法 (W x H x D) Woofer [3 ohms, 100 Hz, 10% THD] ........ 20 W/ch ...... 1030 x 194x 118 mm (40-9/16" x 7-5/8" x 4-11/16") Tweeter [4 ohms, 1 kHz, 10% THD] ........
  • Page 6: Set Menu Table

    YSP-1000...
  • Page 7: Service Precautions / サービス時の注意事項

    YSP-1000 I SERVICE PRECAUTIONS / サービス時の注意事項 安全対策 Safety measures ・ この製品の内部には高電圧部分があり危険です。修理の • Some internal parts in this product contain high voltages and are dangerous. Be sure to take safety measures 際は、絶縁性の手袋を使用するなどの安全対策を行って ください。 during servicing, such as wearing insulating gloves. • Note that C523 on the INPUT (1) P.C.B. is dangerous ・...
  • Page 8 YSP-1000 1. トップパネル、プレート/トップの外し方 1. Removal of Top Panels and Plate/Top a. Remove 8 screws (1). (Fig. 1) a. ①のネジ 8本を外します。 (Fig. 1) b. Remove 2 Top Panels. b. トップパネル 2個を取り外します。 c. ②のネジ 2本を外します。 (Fig. 1) c. Remove 2 screws (2). (Fig. 1) d. Remove the Plate/Top.
  • Page 9 YSP-1000 2. シールドユニットの外し方 2. Removal of Shield Unit a. 3 のネジ 22本を外します。 (Fig. 2) a. Remove 22 screws (3). (Fig. 2) b. Remove the Rear Panel. b. リアパネルを取り外します。 c. 4 のネジ 18本を外します。 (Fig. 3) c. Remove 18 screws (4). (Fig. 3) d. Remove CB2, CB3, CB4, CB504, CB507 and CB508.
  • Page 10 YSP-1000 3. INPUT ( 1) 、 (2) P.C.B.の外し方 3. Removal of INPUT (1), (2) P.C.B. a. 5 のネジ 6本、 6 のネジ 8本、 7 のジャックスクリュー a. Remove 6 screws (5), 8 screws (6) and 2 jack screws (7). (Fig. 4) 2本を外します。 (Fig. 4) b. コネクター CB4を外します。 (Fig. 4)...
  • Page 11 YSP-1000 5. フロントパネルユニットの外し方 5. Removal of Front Panel Unit a. B のネジ 4本を外します。 (Fig. 6) a. Remove 4 screws (B). (Fig. 6) b. Remove 2 Cover FP’s. b. カバー FP 2個を外します。 c. コネクター CB3、CB303を外します。 (Fig. 6) c. Remove CB3 and CB303. (Fig. 6) d. C のネジ 4本を外します。 (Fig. 6)...
  • Page 12 YSP-1000 Sound Absorber 吸音材 Support/ DSP Support/ DSP C Support/ DSP サポート/ DSP サポート/ DSP C サポート/ DSP Fig. 9 Fig. 10 Installation of Driver (Tweeter) スピーカーユニット (ツイーター) の取り付け方 Caution : Make sure that all the removed Driver (tweeter) 注意:取り外したスピーカーユニット (ツイーター) はすべ て決められた位置に取り付けてください。(Fig. B) parts are reinstalled at specified positions.
  • Page 13 YSP-1000 8. スピーカーユニット (ウーファー) の外し方 8. Removal of Driver (Woofer) a. J のネジ 4本を外します。 (Fig. 11) a. Remove 4 screws (J). (Fig. 11) b. Remove the Side Covers L/R. b. サイドカバーL/Rを取り外します。 c. プレート/カバーを取り外します。 c. Remove the Plate/Cover. d. K のネジ 4本を外します。 (Fig. 11) d. Remove 4 screws (K). (Fig. 11) e.
  • Page 14: ファームウェアの書き込み

    YSP-1000 I UPDATING FIRMWARE / ファームウェアーの書き込み After replacing the following parts with the replacement 下記の部品をサービス部品に交換した場合、ファームウェ アの書き込みを行ってください。 parts, update the firmware. P.C.B. DSPのIC11 : X6962B00 IC11 of P.C.B. ASS’Y DSP : X6962B00 ... Writing of DSP ... DSPの書き込み P.C.B. DSPのIC17 : X7073B00 IC17 of P.C.B. ASS’Y DSP : X7073B00 ... DSP APPLICATION / SPIDの書き込み...
  • Page 15 1. PCにDSP̲FLASHER(YSP).exeをインストールしま 1. Install DSP_FLASHER(YSP).exe into the PC. す。 2. Before turning on the power to YSP-1000 and PC, connect between RS232C ports with the RS232C cable 2. Y S P - 1 0 0 0 とP C の電源を入れる前に、それぞれの RS232Cポート間をRS232Cケーブル (クロスケーブル)...
  • Page 16 YSP-1000 5. 送信データ、ポートを選択します。 5. Select the data to be transmitted and port. · MOT FILE ・ MOT FILE Select “SA2_10Vx.mot”. SA2̲10Vx.mot を選択します。 ・ RS232C · RS232C Select the port of RS-232C. 接続しているRS-232Cポートを選択します。 Press this button to open the window このボタンを押すとウィンドウが開きます Select the firmware ファームウェアを選択します...
  • Page 17 7. When the program transmission is completed, the screen appears as shown below. ます。 The press the [OK] button to end the procedure. [OK] ボタンを押して完了します。 8. Disconnect the power cable of YSP-1000 from the AC 8. YSP-1000の電源コードをACコンセントから抜きま す。 outlet. Writing of DSP DSPの書き込み...
  • Page 18 YSP-1000 4. YSP DSP タグを選択します。 4. Select “YSP DSP” Tag. 5. 送信データ、ポートを選択します。 5. Select the data to be transmitted and port. · DSP HEX FILE ・ DSP HEX FILE Select “YSPx00_verxxxx.hex”. YSPx00̲verxxxx.hex を選択します。 ・ RS232C · RS232C Select the port of RS-232C. 接続しているRS-232Cポートを選択します。...
  • Page 19 YSP-1000 7. YSP-1000の電源コードをACコンセントに接続し、 7. Connect the power cable of YSP-1000 to the AC outlet. While pressing the “VOL+” key and “VOL-” key of the YSP-1000の VOL+ キーと VOL- キーを押しながら、 YSP-1000, press the “STANDBY/ON” key of the リモコンの STANDBY/ON キーを押し、ダイアグを起 動します。...
  • Page 20 ば完了です。 The procedure is completed when the value is obtained for “SUM from FILE” and “SUM from SET”. Confirm the value of SUM SUM値を確認します 10.YSP-1000の STANDBY/ON キーを押し、電源をOFF 10.Press the “STANDBY/ON” key of the YSP-1000 to turn off the power. にします。...
  • Page 21 2. Y S P - 1 0 0 0 とP C の電源を入れる前に、それぞれの connect between RS232C ports with the RS232C cable RS232Cポート間をRS232Cケーブル (クロスケーブル) (cross cable). (Fig. 1) 3. Connect the power cable of YSP-1000 to the AC outlet. で接続します。 (Fig. 1) 3. YSP-1000の電源コードをACコンセントに接続し、 While pressing the “VOL+” key and “VOL-” key of the YSP-1000, press the “STANDBY/ON”...
  • Page 22 YSP-1000 5. 送信データ、ポートを選択します。 5. Select the data to be transmitted and port. · COM Port ・COM Port Select the port of RS-232C. 接続しているRS-232Cポートを選択します。 ・D/load Protocol · D/load Protocol Select “SPCM Protocol” SPCMプロトコルを選択します。 Select the port of RS-232C 接続しているRS-232Cポートを選択します Select SPCM Protocol SPCMプロトコルを選択します...
  • Page 23 4 [Done] ボタンを押します。 4 Press the [Done] button. 5 For restarting, use the “STANDBY/ON” key of the 5 YSP-1000またはリモコンの STANDBY/ON キーで YSP-1000 or the remote control. 再起動します。 6 The display returns to screen (1). 6 1の画面に戻ります。 Select SPID and perform steps 1 to 4 for writing.
  • Page 24 YSP-1000 7. YSP-1000の STANDBY/ON キーを押し、電源をOFF 7. Press the “STANDBY/ON” key of the YSP-1000 to turn off the power. します。 8. YSP-1000の VOL+ キーと VOL- キーを押しながら、 8. While pressing the “VOL+” key and “VOL-” key of the YSP-1000, press the “STANDBY/ON” key of the リモコンの...
  • Page 25: Self Diagnosis Function (Diag) / 自己診断機能(ダイアグ

    YSP-1000 I SELF DIAGNOSIS FUNCTION (DIAG) / 自己診断機能(ダイアグ) There are 14 DIAG menu items, each of which has sub- ダイアグメニューは1 4 個あり、そのそれぞれにサブメ ニューがあります。下表はメニュー一覧です。 menu items. Listed in the table below are menu items and sub-menu items. DIAG MENU SUB MENU DSP THROUGH 1.
  • Page 26 YSP-1000 DIAG MENU SUB MENU 11. BS 2 12. BS 3 13. BS 4 14. BS 5 15. BS 6 16. BS 7 17. DS 1 18. DS 2 19. T 11 20. T 12 21. T 13 22. T 21 23.
  • Page 27 YSP-1000 • Starting DIAG ● ダイアグの起動 To activate the DIAG function, press the “STANDBY/ON” 本体の下図に示すキーを同時に押しながらリモコンの key of the remote control while pressing the keys of the STANDBY/ON キーを押すと、ダイアグが起動します。 main unit as shown below at the same time. Keys of main unit / 本体キー...
  • Page 28 YSP-1000 DIAGNOSTIC MENU 1.DSP THR  8.PRESET 2.RAM THR  9.AD CHECK 3.PRO LOGIC 10.IF STATUS 4.MIC CHECK 11.MODEL 5.VFD CHECK 12.VER/SUM 6.MAN LTEST 13.DATE 7.RS232C 14.DSP CHECK 本体のFLディスプレイにプロテクション履歴情報とバージョ The FL display of the main unit displays the protection function history data and the version (1 alphabet) and the ン (英1文字) が表示され、数秒後にダイアグメニュー (No.1 DSP THROUGHのサブメニューTHR ALL)...
  • Page 29 YSP-1000 • History of protection function ● プロテクションの履歴 When the protection function has worked, its history is プロテクションが働いた場合、履歴をバックアップして stored in memory with a backup. Even if no abnormality 記憶しています。サービスのときに異常が認められなく is noted while servicing the unit, an abnormality which ても、バックアップが残っていれば、お客様のところで has occurred previously can be defined as long as the 起きた異常を区別できます。...
  • Page 30 YSP-1000 • Details of DIAG menu ● ダイアグメニュー詳細 With full-bit output specified in some modes, it is possible 一部のモードでフルビット指定することで、各チャンネルの to execute 0dBFS output without head margin in each ヘッドマージンを廃して0dBFS出力することが可能です。 channel. 1. DSP THROUGH 1. DSP THROUGH ビーム化は行わず、サブメニューの指定CHから出力し The signal is not changed into beam and output from ます。...
  • Page 31 YSP-1000 [ DD/dts/AAC multi ] OPT1 TI-DSP Ti-DSP OPT2 SL/SR SL/SR COAX C/LFE C/LFC LFE&BASS Analog1 YSS-930 YSS-930 YSS-930 Analog2 SWFR WFL/WFR TXn(beam) TXn(beam) TXn(beam) [ PCM ] OPT1 TI-DSP Ti-DSP OPT2 COAX L/LFC L&BASS Analog1 YSS-930 YSS-930 YSS-930 Analog2...
  • Page 32 YSP-1000 2. RAM THROUGH 2. RAM THROUGH ビーム化は行わず、サブメニューの指定CHから出力し The signal is not changed into beam and output from ます。 the channel specified by the sub-menu. When 2CH signals are inputted, they are distributed as 2CH信号入力時はDSP♯1にて以下のように信号を振り follows at DSP#1. 分けます。 L CH ..FRONT L, SURROUND L, CENTER, LFE L CH ..
  • Page 33 YSP-1000 [ DD/dts/AAC multi ] OPT1 TI-DSP Ti-DSP OPT2 SL/SR SL/SR COAX C/LFE C/LFC LFE&BASS Analog1 YSS-930 YSS-930 YSS-930 Analog2 SWFR WFL/WFR TXn(beam) TXn(beam) TXn(beam) [ PCM ] OPT1 TI-DSP Ti-DSP OPT2 COAX L/LFC L&BASS Analog1 YSS-930 YSS-930 YSS-930 Analog2...
  • Page 34 YSP-1000 3. PRO LOGIC / NEO6 3. PRO LOGIC / NEO6 PRO LOGIC I, II, Neo:6 can be selected from the SUB サブメニューでPRO LOGIC I、II、Neo:6を選択可能です。 menu items. PRO LOGIC I (PRO LOGIC EMULATION) PRO LOGIC I (PRO LOGIC EMULATION) PRO LOGIC II PRO LOGIC II Neo:6 Neo:6 OPT1 TI-DSP Ti-DSP OPT2...
  • Page 35 YSP-1000 5. EFFECT OFF / DISPLAY CHECK 5. EFFECT OFF / DISPLAY CHECK This program is used to check the FL display section. FL表示部のチェックプログラムです。サブメニュー操 The display condition varies as shown below according 作により、表示状態が以下のように変わります。 信号処理はEFFECT OFF  (ANALOG MAIN BYPASSで to the sub-menu operation. The signals are processed using EFFECT OFF (The L/R signal is output using L/Rを出力)...
  • Page 36 YSP-1000 6. MANUAL TEST 6. MANUAL TEST DSP内蔵のノイズ発生回路によって、サブメニューで指 The noise generator with a built-in DSP outputs the test 定したチャンネルへテストノイズを出力します。 noise through the channels specified by the sub-menu. LFE用のノイズ周波数は35〜250Hz、それ以外は中心周 The noise frequency for LFE is 35 to 250 Hz. Other than that, the center frequency is 800Hz.
  • Page 37 YSP-1000 8. FACTORY PRESET 8. FACTORY PRESET This menu is used to reserve and inhibit initialization of バックアップ用RAM  (音場プログラムのパラメーターや the back-up RAM. The signals are processed using セットメニュー内容等) の初期化を予約/禁止します。 信号処理はEFFECT OFFと同じです (ANALOG MAIN EFFECT OFF. (The L/R signal is output using ANALOG MAIN BYPASS.) BYPASSで、L/Rを出力)...
  • Page 38 YSP-1000 10. IF STATUS 10. IF STATUS (Input function status) Using the sub-menu, the status data is displayed one サブメニュー操作により、以下のステータス情報を順次 after another in the hexadecimal notation. 16進数で表示します。信号処理は、本メニュー実行前 の状態を維持します。 During signal processing, the status before execution of this menu is maintained. ※ 図中の数値は参考例です。...
  • Page 39 YSP-1000 11. MODEL 11. MODEL The information on the model, destination and video モデル、仕向、ビデオフォーマットの情報を表示します。 format is displayed. MODEL SETTING MODEL SETTING DESTINATION DESTINATION J, UC, BGATL or KV is displayed. J、UC、BGATL、KVのいずれかを表示します。 VIDEO FORMAT VIDEO FORMAT NTSC (U, C, K, V, J models) NTSC (U、C、K、V、J models)...
  • Page 40 YSP-1000 13. DATE 13. DATE There are 6 SUB menu items. サブメニューは6つあります。 The updated date of the program, clearance of the プログラムの更新日付、プロテクション履歴のクリア、 リモコン受信コードを表示します。 protection history and the remote control reception code are displayed. Remo Codeのメニューにすると、リモコンの全キーの 値を検出するためキー操作はできなくなりますが、本体 When Remo Code menu is selected, keys become non- のINPUTキーを押すことにより、次のサブメニューに進...
  • Page 41 YSP-1000 14. DSP CHECK 14. DSP CHECK Tx Test Ch Tx Test Ch 各スピーカーユニットを鳴らし、不良・取付位置の確認を Have the sound produced from each driver to check its condition and installation position. します。 リモコンの ENTER キー、 RETURN キーを使って選択 Use the “ENTER” and “RETURN” keys of the remote します。...
  • Page 42 YSP-1000 RS232C RS232C Select the protocol of RS-232C connection. RS-232C接続のプロトコルを選択します。 It select it at the time of writing IC17. / (IC17) 書き込み時選択します。 Cert Mode Cert Mode 試験用の特殊モードを選択します。 Select the special mode for testing. * Be sure to set to “OFF” ※ 必ず OFF にしてください...
  • Page 43: Display Data

    YSP-1000 I DISPLAY DATA G V1 : 15-BT-99GNKF (WE204600) PATTERN AREA G PIN CONNECTION Pin No. Connection 24 23 22 21 20 19 Pin No. Connection P32 P33 P34 P35 NX NX Note : 1) F1, F2 ..Filament 2) NP ..No pin 3) NX ..
  • Page 44: Ic Data

    YSP-1000 I IC DATA IC26 : M30626FJPFP (DSP P.C.B) 16-bit Microprocessor Port P0 Port P1 Port P2 Port P3 Port P4 Port P5 Port P6 <VCC2 ports> <VCC1 ports> Internal peripheral functions A/D converter System clock (10 bits 8 channels...
  • Page 45 YSP-1000 IC26 : M30626FJPFP (DSP P.C.B) IC26 : M30626FJPFP (DSP P.C.B) 16-bit Microprocessor 16-bit Microprocessor Pin No. Port Definition Function Pin No. Name Definition Function PO96 Data output to FL driver Clock signal to EEPROM FL_TXD PO40 PO95 FL_CLK Clock output to FL driver...
  • Page 46 YSP-1000 I BLOCK DIAGRAM (1/2) IC24 IC516 29,36 DRIVER YDA138 • See page 61~63 → WOOFER R DIGITAL SCHEMATIC DIAGRAM RMCK INPUT IC716 XTAL Woofer 24.576MHz 29,36 DRIVER DVD(U,C,T,K,A,B,G,L,V YDA138 28,29 WOOFER L models)/ 2 7 24MT AUX(J model) 3 1 2...
  • Page 47: Block Diagram

    YSP-1000 I BLOCK DIAGRAM (2/2) • See page 67 → • See page 66 → INPUT(1) INPUT(2) SCHEMATIC DIAGRAM SCHEMATIC DIAGRAM T502 D522 D510 TH501 MGND +12A SWITCHING D542 D528 POWER SUPPLY IC510 +12V C556 +5VA +5VA D523 IC509 C543...
  • Page 48 YSP-1000 I PRINTED CIRCUIT BOARD (Foil side) DSP P.C.B. (Side A) Lead Free Solder Used to MAIN U-COM WRITER INPUT (1) INPUT (2) INPUT (2) (CB508) (CB3) (CB2) C384 AMP (2) (CB502) AMP (1) (CB702) DGND YASDO0 AGND YASDO1 WFL_OUT...
  • Page 49 YSP-1000 I PRINTED CIRCUIT BOARD (Foil side) DSP P.C.B. (Side B) Lead Free Solder Used • Semiconductor Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location IC18 IC19 IC20 IC22 IC10 IC23 IC13 IC24...
  • Page 50 YSP-1000 I PRINTED CIRCUIT BOARD (Foil side) • Semiconductor Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location D501 D507 IC502 IC510 Q501 D502 D508 IC503 IC512 Q502 AMP (2) P.C.B. (Side A) Lead Free Solder Used...
  • Page 51: Printed Circuit Board

    YSP-1000 I PRINTED CIRCUIT BOARD (Foil side) • Semiconductor Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location D701 D707 IC702 IC710 Q701 D702 D708 IC703 IC712 Q702 AMP (1) P.C.B. (Side A) Lead Free Solder Used...
  • Page 52 YSP-1000 I PRINTED CIRCUIT BOARD (Foil side) INPUT (1) P.C.B. (Side A) Circuit No. U, C, V, J T, K, A, B, G, L C501 X : NOT USED O : USED / APPLICABLE INPUT (2) (W505) AGND AC IN...
  • Page 53 YSP-1000 I PRINTED CIRCUIT BOARD (Foil side) INPUT (1) P .C.B. (Side B) Lead Free Solder Used • Semiconductor Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location D502 D513 D527 D541 D504 D514 D529 IC505...
  • Page 54 YSP-1000 I PRINTED CIRCUIT BOARD (Foil side) INPUT (2) P.C.B. (Side A) OPTICAL AUDIO IN VIDEO IN VIDEO OUT RS-232C REMOTE IN COAXIAL TV/STB TV / STB SUBWOOFER DVD / AUX INPUT (1) (CB4) AGND AGND A12V +5VA S3.3 +12B (W3) •...
  • Page 55 YSP-1000 I PRINTED CIRCUIT BOARD (Foil side) INPUT (2) P.C.B. (Side B) Lead Free Solder Used • Semiconductor Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location Circuit No. U, C, T, K, A, B, G, L, V...
  • Page 56 YSP-1000 I PRINTED CIRCUIT BOARD (Foil side) INPUT (3) P.C.B. (Side A) INPUT (3) P.C.B. (Side B) Lead Free Solder Used OPERATION (4) (CB301) IR OUT • Semiconductor Location Ref. No. Location Ref. No. Location D401 D407 D402 D408 D403...
  • Page 57 YSP-1000 I PRINTED CIRCUIT BOARD (Foil side) OPERATION (1) P.C.B. (Side A) (CB6) OPERATION (2) (W12) KEY0 KEY1 S3.3 STBY_SW FL DISPLAY REMOTE CONTROL SENSOR OPERATION (1) P.C.B. (Side B) Lead Free Solder Used 32 33 • Semiconductor Location Ref. No. Location...
  • Page 58 YSP-1000 I PRINTED CIRCUIT BOARD (Foil side) • Semiconductor Location Ref. No. Location D801 D802 OPERATION (2) P.C.B. (Side A) D803 D805 IC801 OPERATION (2) P.C.B. (Side B) Lead Free Solder Used Q801 OPERATION (1) (CB3) OPERATION (3) P.C.B. (Side A) OPERATION (3) P.C.B.
  • Page 59: Pin Connection Diagram

    YSP-1000 I PIN CONNECTION DIAGRAM • ICs • Diodes AN77L04 S-29630AFJA PQ1CZ41H2Z 1Z180 1SS133 MA8036 SB01-05Q NJM78M05FA NJM2068MD-TE2 µPC4570G2 1Z330 1SS355 MA8051-M NJM78L09A-T3 NJM78M12FA AK09V0 1SS380 MA8062-M NJM2717M D1NL20U Anode RB501V-40 MA8068-M ERA22 UDZ5.1B MA8091-M Anode MTZJ27D MA8100-M MA8110-H MA8150-H...
  • Page 60 YSP-1000 MEMO MEMO...
  • Page 61: Schematic Diagram

    YSP-1000 SCHEMATIC DIAGRAM (DSP 1/3) IC9: W9816G6CH-7 POINT B-1 Pin 13 of IC26 512K x 2 Banks x 16 Bits SDRAM CLK 35 CLOCK BUFFER CKE 34 CONTROL COLUMN DECODER SIGNAL GENERATOR COMMAND DECODER CELL ARRAY 2 DQ0 BANK #0...
  • Page 62 YSP-1000 SCHEMATIC DIAGRAM (DSP 2/3) IC12: D60YA003BPYP225 Decoder Digital Signal Processors EMIF32 L2 Cache/ L1P Cache Memory 4 Banks Direct Mapped McASP1 64K Bytes 4K Bytes Total Total McASP0 (4-Way) C67x McBSP1 Instruction Fetch Control Registers McBSP0 Instruction Dispatch Control...
  • Page 63 YSP-1000 SCHEMATIC DIAGRAM (DSP 3/3) IC18, 19, 20: YSS930-SZ MICROPROCESSOR INTERFACE PROGRAM COEFFICIENT ADDRESS CONTROL REGISTER 50 bit ✻ 1024 word 16 bit ✻ 1024 word 17 bit ✻ 256 word CONTROL SIGNALS SDBCK SDWCK SDI0 SDO0 SDI1 SDO1 SDI2...
  • Page 64 YSP-1000 SCHEMATIC DIAGRAM (AMP 1/2) DRIVER (WOOFER) Page 63 to DSP_CB8 Page 67 to INPUT (1)_CB504 AMP (2) DRIVER DRIVER DRIVER DRIVER IC516: YDA138 IC501, 502, 505, 506, 509, 510, 512~515: YDA139 (TWEETER) (TWEETER) (TWEETER) (TWEETER) Digital audio power amplifier...
  • Page 65 YSP-1000 SCHEMATIC DIAGRAM (AMP 2/2) DRIVER (WOOFER) Page 63 to DSP_CB9 Page 67 to INPUT (1)_CB507 AMP (1) IC716: YDA138 IC701, 702, 705, 706, 709, 710, 712~715: YDA139 Digital audio power amplifier Digital audio power amplifier DRIVER DRIVER DRIVER DRIVER...
  • Page 66 YSP-1000 SCHEMATIC DIAGRAM (INPUT 1/2) 12.0 POINT A-3 Pin 6 of IC10 INPUT SELECTOR 12.0 Page 63 to DSP_W3 IC2: BA7611AF IC9: NJM2257M Video signal switcher Synchronous signal separator MUTE CTLA CTLB LOGIC INPUT SELECTOR 12.0 12.0 IC6: NJM2585M 12.0 Wide band 3-input 1-output 3-circuit video amplifier 12.0...
  • Page 67 YSP-1000 SCHEMATIC DIAGRAM (INPUT 2/2) Safety measures • Some internal parts in this product contain high voltages and are dangerous. Be sure to take safety measures during servicing, such as wearing insulating gloves. • Note that C523 is dangerous even after the power is turned off because an electric charge remains and a high voltage continues to exist there.
  • Page 68 YSP-1000 SCHEMATIC DIAGRAM (OPERATION) OPERATION (4) 12.0 OPTIMAIZER MIC Page 63 to DSP_CB7 Page 67 to INPUT (3)_W401 OPERATION (3) FL DISPLAY Page 63 to DSP_CB6 -24.1 -17.5 -17.8 12.0 -17.9 -22.5 -17.8 -22.5 -24.7 -17.8 -22.5 -17.8 -22.5 -16.2 -16.2...
  • Page 69: Parts List

    YSP-1000 PARTS LIST I ELECTRICAL PARTS I WARNING Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. ● s印のある部分は、 安全確保部品を示 しています。 部品の交換が必要な場合、 パーツ リ ス トに記載されている部品を使用 して く ださい。...
  • Page 70 YSP-1000 P.C.B. DSP Ref No. Part No. Description Remarks Markets 部 品 名 Rank WG114900 P.C.B. PCB DSP WC195900 CN.BS.PIN 9P TE     FMN FMNコネクター VT388300 CN.BS.PIN ベース付ポスト CB4‑5 WC195900 CN.BS.PIN 9P TE     FMN FMNコネクター WD736900 CN.BS.PIN 14P TE ベース付ポスト VT388700 CN.BS.PIN ベース付ポスト CB8‑9 WC198000 CN.BS.PIN 30P TE    FMN FMNコネクター WE477600 C.EL 100uF     16V ケミコン...
  • Page 71 YSP-1000 P.C.B. DSP Ref No. Part No. Description Remarks Markets 部 品 名 Rank C108 US063100 C.CE.CHP 1000pF    50V B チップセラコン C109 US135100 C.CE.CHP 0.1uF     16V チップセラコン C110 US035100 C.CE.CHP 0.1uF     16V B チップセラコン C111 US063100 C.CE.CHP 1000pF    50V B チップセラコン C112‑113 US035100 C.CE.CHP 0.1uF     16V B チップセラコン C114 US135100 C.CE.CHP 0.1uF     16V チップセラコン...
  • Page 72 YSP-1000 P.C.B. DSP Ref No. Part No. Description Remarks Markets 部 品 名 Rank C274‑277 US135100 C.CE.CHP 0.1uF     16V チップセラコン C278 US062680 C.CE.CHP 680pF     50V B チップセラコン C279 US135100 C.CE.CHP 0.1uF     16V チップセラコン C280 US063100 C.CE.CHP 1000pF    50V B チップセラコン C281 UF017220 C.EL.CHP 22uF      6.3V チップケミコン C282‑283 US135100 C.CE.CHP 0.1uF     16V チップセラコン...
  • Page 73 YSP-1000 P.C.B. DSP & P.C.B. AMP Ref No. Part No. Description Remarks Markets 部 品 名 Rank IC17 X7073B00 IC MBM29LV160BE‑70TN メモリIC 16M IC18‑20 X3567A00 IC YSS930‑SZ IC IC21 X3833A00 IC SN74AHC1G08DCKR ロジックIC IC22 X6071A00 IC WM8728 D/Aコンバーター IC23 X5798A00 IC S‑29630AFJA EEPROM メモリIC IC24 X6071A00 IC WM8728 D/Aコンバーター...
  • Page 74 YSP-1000 P.C.B. AMP Ref No. Part No. Description Remarks Markets 部 品 名 Rank C531 US135100 C.CE.CHP 0.1uF     16V チップセラコン C532 UR866100 C.EL 1uF       50V ケミコン C533 US135100 C.CE.CHP 0.1uF     16V チップセラコン C534‑535 US126100 C.CE.CHP 1uF       10V チップセラコン C536‑537 US135100 C.CE.CHP 0.1uF     16V チップセラコン C539 UA655100 C.MYLAR 0.1uF     50V J マイラーコン...
  • Page 75 YSP-1000 P.C.B. AMP Ref No. Part No. Description Remarks Markets 部 品 名 Rank C626‑627 US145100 C.CE.CHP 0.1uF     25V チップセラコン C628‑629 US126100 C.CE.CHP 1uF       10V チップセラコン C701 US145100 C.CE.CHP 0.1uF     25V チップセラコン C702 US135100 C.CE.CHP 0.1uF     16V チップセラコン C703 US126100 C.CE.CHP 1uF       10V チップセラコン C704 US135100 C.CE.CHP 0.1uF     16V チップセラコン...
  • Page 76 YSP-1000 P.C.B. AMP Ref No. Part No. Description Remarks Markets 部 品 名 Rank C778 UR818220 C.EL 220uF     6.3V ケミコン C781 UR866100 C.EL 1uF       50V ケミコン C782 US135100 C.CE.CHP 0.1uF     16V チップセラコン C783 UR866100 C.EL 1uF       50V ケミコン C784 US135100 C.CE.CHP 0.1uF     16V チップセラコン C785‑786 US126100 C.CE.CHP 1uF       10V チップセラコン...
  • Page 77 YSP-1000 P.C.B. AMP & P.C.B. INPUT Ref No. Part No. Description Remarks Markets 部 品 名 Rank R543‑544 HV753220 R.CAR.FP 2.2Ω     1/4W 不燃化カーボン抵抗 R562‑563 HV753220 R.CAR.FP 2.2Ω     1/4W 不燃化カーボン抵抗 R580‑581 HV753220 R.CAR.FP 2.2Ω     1/4W 不燃化カーボン抵抗 R590 HV753100 R.CAR.FP 1Ω       1/4W 不燃化カーボン抵抗 R703‑704 HV753220 R.CAR.FP 2.2Ω     1/4W 不燃化カーボン抵抗 R705 HV753100 R.CAR.FP 1Ω       1/4W...
  • Page 78 YSP-1000 P.C.B. INPUT Ref No. Part No. Description Remarks Markets 部 品 名 Rank UR866100 C.EL 1uF       50V ケミコン C41‑42 UR837100 C.EL 10uF      16V ケミコン C43‑45 US035100 C.CE.CHP 0.1uF     16V B チップセラコン C46‑47 UR866100 C.EL 1uF       50V ケミコン US035100 C.CE.CHP 0.1uF     16V B チップセラコン US065100 C.CE.CHP 0.1uF     50V B チップセラコン US062100 C.CE.CHP 100pF     50V B チップセラコン...
  • Page 79 YSP-1000 P.C.B. INPUT Ref No. Part No. Description Remarks Markets 部 品 名 Rank C406 US064100 C.CE.CHP 0.01uF    50V B チップセラコン C407 UM397470 C.EL 47uF      16V ケミコン C408 US061270 C.CE.CHP 27pF      50V B チップセラコン C409 US064100 C.CE.CHP 0.01uF    50V B チップセラコン C410 UM397100 C.EL 10uF      16V ケミコン C411 US061270 C.CE.CHP 27pF      50V B チップセラコン...
  • Page 80 YSP-1000 P.C.B. INPUT Ref No. Part No. Description Remarks Markets 部 品 名 Rank C561 UA656100 C.MYLAR 1uF       50V J マイラーコン C562‑564 UA655470 C.MYLAR 0.47uF    50V J マイラーコン VU991000 DIODE.ZENR MA8036    3.6V ツェナーダイオード VU991000 DIODE.ZENR MA8036    3.6V ツェナーダイオード VU991000 DIODE.ZENR MA8036    3.6V ツェナーダイオード VU991000 DIODE.ZENR MA8036    3.6V ツェナーダイオード VT332900 DIODE 1SS355 ダイオード...
  • Page 81 YSP-1000 P.C.B. INPUT Ref No. Part No. Description Remarks Markets 部 品 名 Rank IC10 X6692A00 IC MB90050PF‑110E1 OSDコントローラ IC11 X7231A00 IC M62782GP リセットIC IC12 XF740A00 IC NJM78M05FA IC IC15 XZ012A00 IC TC74HCT08AF(EL) ロジックIC IC16 X0651A00 IC NJM78L09A‑T3 電源IC フラット IC401 X6955A00 IC NJM2716F OPAMP アンプIC...
  • Page 82 YSP-1000 P.C.B. INPUT & P.C.B. OPERATION Ref No. Part No. Description Remarks Markets 部 品 名 Rank R540 R.CHP 560KΩ    1/16W J TKABGL チップ抵抗 R543‑544 VP940300 R.MTL.OXD 68Ω      1W 酸化金属被膜抵抗 R549 VP939500 R.MTL.FLM 1Ω       1W 金属被膜抵抗 s RY501 WE513800 RELAY DC HRM3H‑DC12V リレー12V VV011000 SW.TACT SKHLLC タクトSW s T501 XW605A00 TRANS.PWR...
  • Page 83 YSP-1000 P.C.B. OPERATION Ref No. Part No. Description Remarks Markets 部 品 名 Rank C817 UM397220 C.EL 22uF      25V ケミコン C819‑822 US064100 C.CE.CHP 0.01uF    50V B チップセラコン C823 US062560 C.CE.CHP 560pF     50V B チップセラコン VU993400 DIODE.ZENR MA8062‑M  6.2V ツェナーダイオード D801‑803 VT332900 DIODE 1SS355 ダイオード D805 VU171900 DIODE.ZENR UDZ5.1B   5.1V ツェナーダイオード X2874A00 IC M66003‑0101FP FLD...
  • Page 84 YSP-1000 Chip Resistors The chip resistor is not supplied as a replacement part. ● チッ プ抵抗はサービス部品と して供給 しません。 * When a chip resistor is necessary, use the following part. ※ チッ プ抵抗が必要な場合は、 下記の部品をご利用く ださい。 AAX60720: CHIP RESISTOR SAMPLE BOOK AAX60720: CHIP RESISTOR SAMPLE BOOK Ref No.
  • Page 85 YSP-1000 Chip Resistors Ref No. Part No. Description Remarks Markets 部 品 名 Rank R.CHP 270KΩ    1/16W J 0816 チップ抵抗 R.CHP 470KΩ    1/16W J 0816 チップ抵抗 R.CHP 560KΩ    1/16W J 0816 チップ抵抗 R.CHP 620Ω     1/16W J チップ抵抗 R.CHP 1MΩ      1/16W J 0816 チップ抵抗 R.MTL.CHP 470Ω     1/16W D 0816 チップ金属被膜抵抗 R.MTL.CHP 12KΩ     1/16W D 0816 チップ金属被膜抵抗 R.CHP 75Ω      1/16W F 0816 LEAD FREE チップ抵抗...
  • Page 86 YSP-1000 Parts List for Carbon Resistors Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No. 1.0 Ω 3100 3100 10 kΩ 7100 7100 HJ35 HF85 HF45 HF45 1.8 Ω ❊ 3180 11 kΩ...
  • Page 87 YSP-1000 I EXPLODED VIEW I MECHANICAL PARTS Ref No. Part No. Description Remarks Markets 部 品 名 Rank 1‑15 WE981400 CUSHION 90x40 クッション 90x40 1‑31 WF539400 FRONT PANEL ASS'Y フロントパネルASSY 3-105 1‑31 WF539500 FRONT PANEL ASS'Y UCTKABGLV フロントパネルASSY 1‑32 WD833200 BUTTON ボタン 3-15 3-112 1‑41 WE203500 レッグ 1‑51 WE203200 PACKING A...
  • Page 88 YSP-1000 I ACCESSORIES I PACKING ASS’Y 300-1 2 1 pair Ref No. Part No. Description Remarks Markets 部 品 名 Rank Ref No. Part No. Description Remarks Markets 部 品 名 Rank ACCESSORIES 付属品 PACKING ASS'Y 梱包用部品 WF729800 REMOTE CONTROL RRC4001‑2602EM リモコン WG114000 CARTON BOX 梱包箱 WF756400 REMOTE CONTROL RRC4001‑2603EM リモコン WG114100 CARTON BOX...
  • Page 89 YSP-1000 I MAIN UNIT 2-103 2-75 Ref No. Part No. Description Remarks Markets 部 品 名 Rank 2-103 2-21 2‑3 WG114800 P.C.B. ASS'Y PCB AMP 2-111 2-111 2-75 2‑4 WG114900 P.C.B. ASS'Y PCB DSP 2‑11 WG167600 FLEXIBLE FLAT CABLE 30P 50mm P=1.0 カード電線 2‑15 WF536700 FRONT GRILLE フロントグリル 2-77 2-21 2-103 2-103 2‑15 WD831100 FRONT GRILLE...
  • Page 90 YSP-1000 I SUB CHASSIS UNIT Ref No. Part No. Description Remarks Markets 部 品 名 Rank 2‑1‑11 X7213A00 DRIVER WOOFER 11cm 4Ω スピーカーユニット 2‑1‑12 X6547A00 DRIVER TWEETER 4cm  10Ω スピーカーユニット 2-1-55 2‑1‑12 X6548A00 DRIVER TWEETER 4cm  10Ω UCTKABGLV スピーカーユニット 2‑1‑25 WF538600 GRILLE SPEAKER ASS'Y グリルSP ASSY 2-1-103 2‑1‑31 WF538400 SUPPORT GRILLE L サポート/グリルL 2‑1‑32 WF538500 SUPPORT GRILLE R...
  • Page 91: Remote Control

    YSP-1000 I REMOTE CONTROL U model C, T, K, A, B, G, L, V models J model Key Layout Function Code 78-4A VCR / ビデオ 78-49 STB / チューナー 78-DF TV / テレビ 78-DF AUXv 78-DE TV INPUT1 / 入力1 (TV / テレビ) –...
  • Page 92: Ysp-1000 Packing Instruction / 梱包手順説明書

    YSP-1000...

Table of Contents