Workgroup Bridge - Linksys LAPN600 User Manual

Workgroup Bridge

Workgroup Bridge feature enables the access point to extend the accessibility of a remote network.
In Workgroup Bridge mode, the access point acts as a wireless station (STA) on the wireless LAN. It
can bridge traffic between a remote wired network and a wireless LAN.
When Workgroup Bridge is enabled, SSID configuration still works to provide wireless
services to clients.
All access points participating in Workgroup Bridge must have the identical settings for Radio
interface, IEEE 802.11 mode, Channel Bandwidth, Channel (Auto is not recommended).
Data - Workgroup Bridge Screen
Workgroup Bridge
Select the desired radio from the list.
Radio
Figure 30: Workgroup Bridge
44